Use of working flashing lights remains compulsory. Think about it, not putting a flashing light is liable to 3 point on your driver's license as well as a traffic ticket . Although some law enforcement officials are sometimes lenient on this point. It therefore remains essential to have flashing lights in good working order. We will see below how to replace the bulb of a Renault Egeus indicator light, front and rear. It is also conceivable that the concern comes from a false contact, but it is relatively exceptional.change-flashing-Renault-Egeus

Renault Egeus: things to know before replacing your turn signal

First of all it is essential to choose the right type of bulb! So as not to be mistaken, we advise you to go to a spare parts site or to your garage which will be able to select them. Then you have to think about choosing the right color for your bulb. Thereafter, you will need a tools super basic but still necessary. You will therefore mainly need a screwdriver for a Renault Egeus. A kit of cruciform and torx and you will necessarily be able to get there. Almost every time, the bulbs are bayonet . In order to remove the defective bulb, it must be turned a quarter of a turn to the left. In order to fix the new bulb, it is thus necessary to turn a quarter of a turn in the opposite direction.

How to change the bulb of a front indicator on a Renault Egeus

There are two different solutions to access the flashing lights. It depends on the different models, but accessibility will be either from the outside or from the inside on a Renault Egeus. Access from inside the engine : To start, you will have to open the hood. Then, you must remove a cover using a screwdriver (often torx) to access the headlight unit. Now that the block is unscrewed, remove it and it is possible to replace the bulb. Wheel arch access : Check underneath the wheel to see if the clips are there. In this case, the fixings must be dismantled and the screws removed using a screwdriver. Then remove the headlight unit from the Renault Egeus slowly from the front. You just need to replace the bulb and put the light block back in the opposite direction. Exceptionally, on certain models it is conceivable to replace the headlight unit from the outside. However, it is relatively rare. In this case, using a screwdriver, you will need to remove the fixings, gently remove the headlight unit and replace the faulty bulb.

How to change the bulb of a rear indicator on a Renault Egeus

We can also find two different solutions to access your turn signal bulb. It depends on the models however the accessibility will be done either inside or outside. Access from inside the trunk : Almost every time accessibility will be from the trunk. At the headlight blocks, there are screws and fixings. Remove them and lay the block gently. Then you simply have to replace the faulty bulb with a new one. Then repeat this operation in reverse. It is also conceivable that accessibility can be from the outside or under the wheel arch. However, it is much rarer. In all cases, you must use your screwdriver and carefully remove the entire headlight unit so as to replace your bulb. To reassemble, reverse the process.