Having working flashing lights remains mandatory. Remember, forgetting to put a flashing light is punishable by 3 point on the permit as well as a traffic ticket . Even if some police officers are sympathetic at times on this point. It is thus necessary to have flashing lights in good working order. We will therefore find out below how to change the bulb of a Renault Espace 4 turn signal, at the front and rear. It is also conceivable that the malfunction comes from a short circuit, however it is quite exceptional.
Renault Espace 4: things to know before changing your turn signal
First of all, it is essential to choose the right bulb model! In order not to be mistaken, it is advisable to go to a spare parts site or to a mechanic who can order them for you. Then it is necessary to be careful to choose the right color of the bulb. Thereafter, you will need a tools very basic but nevertheless necessary. You will therefore mainly need a screwdriver for a Renault Espace 4. A set of cruciforms and torx and you will be able to do it. Generally, the bulbs are at bayonet . In order to dismantle the faulty bulb, it must be rotated a quarter of a turn to the left. To put the new bulb, you will have to turn it a quarter of a turn in the opposite direction.
How to change the bulb of a front indicator on a Renault Espace 4
There are two different ways to reach the indicators. It depends on the different models, however access can be done either from the outside or from the inside for this Renault Espace 4. Access from inside the engine : First of all, you will have to open the hood. And then, you will have to unscrew a cover with a screwdriver (usually torx) in order to access the light block. As soon as the block is unscrewed, remove it and you can change your bulb. Wheel arch access : Check underneath the wheel to see if the clips are there. When that's right, you will need to remove the fasteners and remove the screws with a screwdriver. Then remove the light block from your Renault Espace 4 gently from the front. You simply have to change your bulb and reattach the block of lights following the opposite procedure. Less frequently, for some models it is conceivable to remove the block of lights from the outside. Nevertheless it is quite rare. When that's it, with a screwdriver you will need to remove the fasteners, gently release the light block and change your faulty bulb.
How to change the bulb of a rear indicator on a Renault Espace 4
There are also two different ways to access this turn signal bulb. It depends on the models, however access can be done either from the inside or from the outside. Access from inside the trunk : Frequently access can be done from inside the trunk. For these light blocks, there are screws and fasteners. Remove them and remove the part slowly. Thereafter you will just have to change your faulty bulb with the new one. And then repeat the same manipulation in the other direction. It is also conceivable that access can be from the outside or under the wheel arch. However, it is much less frequent. Whatever happens, you will need to bring your screwdrivers and remove, paying careful attention to the entire light unit so as to change the bulb. To reassemble, perform the opposite manipulation.