Having working indicators is a legal requirement. Remember, forgetting to put a turn signal is punishable by 3 point on the permit as well as a traffic ticket . Although some law enforcement officials are sometimes sympathetic to this matter. It therefore remains essential to have indicators in good condition. We will therefore now find out how to replace the bulb of a turn signal for a Renault Frendzy, front and rear. It is also conceivable that the problem comes from a short circuit, but it is quite rare.change-flashing-Renault-Frendzy

Renault Frendzy: things to know before replacing your turn signal

At first it is important to properly select the model of your bulb! In order not to be mistaken, it is advisable to go to a spare parts website or to a car repairer who will be able to order them for you. In the second step, you will have to be careful to select the right color for your bulb. Then you will need to use a tools super simple but still necessary. You will therefore mainly need a screwdriver for a Renault Frendzy. A cruciform and torx kit and nothing can happen to you. In most cases, the bulbs are at bayonet . In order to be able to dismantle the damaged bulb, you must turn the bulb a quarter of a turn to the left. In order to install the new bulb, you will have to turn it a quarter of a turn in the opposite direction.

How to change the bulb of a front indicator on a Renault Frendzy

There are two different ways to reach the indicators. It depends on the different models, but accessibility can be done either outside or inside on this Renault Frendzy. Access from inside the engine : First, open your hood. Then, you will have to unscrew a cover with a screwdriver (often torx) in order to access the headlight unit. Once the block is unscrewed, remove it and you can replace your bulb. Wheel arch access : Inspect below the wheel to see if the fasteners are there. If so, you will need to remove the hooks and remove the screws using a screwdriver. Then remove the headlight block from this Renault Frendzy delicately from the front. All you have to do is replace your bulb and reattach the block in the opposite direction. More rarely, on some models it is conceivable to remove the headlight unit from the outside. However it is quite rare. If this is the case, with a screwdriver you will have to disassemble the fixings, remove the headlight unit slowly and change your burnt out bulb.

How to change the bulb of a rear indicator on a Renault Frendzy

There are also two different ways to access the turn signal bulb. It depends on the ranges but accessibility can be done either from inside or outside. Access from inside the trunk : Frequently accessibility can be done from the trunk. At the level of the light blocks, you will find screws and fixings. Remove them and lay the block down slowly. Then you will only have to change your burnt out bulb with the new one. Then repeat this operation in reverse. It also remains conceivable that accessibility is done from the outside or through the wheel arch. However, it is much rarer. Whatever happens, you will have to take your screwdriver and carefully remove the assembly of the light block so as to replace your bulb. To set it up, take the opposite step.