Having working turn signals is mandatory. As a reminder, not putting a flashing light is punishable by 3 point on the permit as well as a traffic ticket . Although some law enforcement officers are complacent on this point from time to time. It is therefore essential to have turn signals in good working order. We will therefore see below how to replace the bulb of a flashing light on a Renault Grand Espace 3, front and rear. It is also likely that the concern comes from a false contact, however it is quite exceptional.change-flashing-Renault-Grand-Espace-3

Renault Grand Espace 3: things to know before replacing your indicator

First of all, it is wiser to select your type of bulb carefully! In order not to go wrong, we advise you to go to a spare parts website or to a professional who knows how to order them for you. Secondly, you will have to think about choosing the right color for your bulb. Subsequently, you will need to use a tools extremely simple but still necessary. So you will mainly need a screwdriver for a Renault Grand Espace 3. A set of cruciforms and torx and everything will be doable. Almost every time, the bulbs are bayonet . In order to remove the defective bulb, you must turn it a quarter of a turn to the left. In order to put the new bulb, it will therefore be necessary to turn a quarter of a turn in the other direction.

How to change the bulb of a front indicator on a Renault Grand Espace 3

There are two different ways to access the turn signals. It depends on the model, however accessibility will be either from the outside or from the inside on your Renault Grand Espace 3. Access from inside the engine : First of all, you will have to open your hood. And then, you will have to unscrew a cover with the help of a screwdriver (often torx) to access the light unit. When the block is unclipped, remove the latter and do not hesitate to replace this bulb. Wheel arch access : Check under the wheel to see if the clips are in this location. If this is what happens, you will have to undo the hooks and remove the screws using a screwdriver. Secondly, remove the light unit of your Renault Grand Espace 3 slowly from the front. Now all you have to do is replace your bulb and position the block in the opposite direction. More rarely, on some cars it is still likely to remove the light unit from the outside. However, it is quite rare. In the event that this is what happens, with the help of a screwdriver you will have to remove the fasteners, remove the light unit slowly and replace your defective bulb.

How to change the bulb of a rear indicator on a Renault Grand Espace 3

There are also two different ways to access the turn signal bulb. It depends on the models, however accessibility will be either from inside or from outside. Access from inside the trunk : Almost every time the accessibility will be from the trunk. Regarding the light blocks, you will find screws and fixings. Take them out and put the block down gently. Then you will just have to replace this defective bulb with the new one. And then repeat this operation in reverse order. It is also likely that accessibility is from the outside or through the wheel arch. However, it is much less common. Whatever happens, you will have to take your screwdrivers and remove, being careful, the entire light unit in order to replace this bulb. To put it in place, do the reverse manipulation.