Having working flashing lights remains a legal requirement. Think about it, forgetting to put a flashing light is punishable by 3 point on the permit as well as a fine . Although some law enforcement officials are regularly lenient on this subject. It is therefore important to have flashing lights that work properly. We will now see how to replace the bulb of a Renault Grand Kangoo turn signal, front and rear. It is sometimes conceivable that the problem comes from a short circuit, but it is rather rare.change-flashing-Renault-Grand-Kangoo

Renault Grand Kangoo: things to know before replacing your turn signal

First of all, it is essential to choose the right type of bulb! In order not to be mistaken, we advise you to go to a spare parts website or to your mechanic who can select them. Secondly you will have to be careful to choose the right color for your bulb. Then you will need a tools very basic but nevertheless necessary. You will therefore mainly need a screwdriver for a Renault Grand Kangoo. A kit of cruciform and torx and you will necessarily be able to get there. Most of the time, the bulbs are at bayonet . In order to remove the broken bulb you need to rotate the bulb a quarter of a turn to the left. In order to fix the new bulb, you will therefore have to rotate a quarter of a turn in the opposite direction.

How to change the bulb of a front indicator on a Renault Grand Kangoo

There are two different ways to access the turn signals. It depends on the different models, but accessibility can be done either outside or inside on a Renault Grand Kangoo. Access from inside the engine : To start, you will need to open the hood. Then, it is necessary to remove a cover using a screwdriver (often torx) to access the light block. As soon as the block is unscrewed, remove it and you can replace this bulb. Wheel arch access : Look below the wheel to see if the clips are there. If this ever happens, you will need to remove the fasteners and remove the screws using a screwdriver. Secondly, carefully remove the light unit from your Renault Grand Kangoo from the front. Now just replace the bulb and position the block in the opposite direction. Exceptionally, on some models it is conceivable to replace the block of lights from the outside. Nevertheless it is rather rare. If this is what happens, using a screwdriver you will need to remove the fixings, gently remove the light unit and change the defective bulb.

How to change the bulb of a rear indicator on a Renault Grand Kangoo

There are also two different ways to access this turn signal bulb. It can depend on the different types, however accessibility can be done either from inside or outside. Access from inside the trunk : In most of the cases accessibility can be done from the trunk. At the level of the light blocks, there are screws and fixings. Remove them and slowly remove the block. Then it is necessary to just replace this defective bulb with a new one. Then repeat this operation in the other direction. It is also conceivable that accessibility can be from the outside or through the wheel arch. However, it is much less frequent. Whatever happens, you will have to use your screwdriver and gently remove the entire light block so that you can replace this bulb. To put it in place, carry out the opposite manipulation.