Using direction indicators that are in good condition remains a legal obligation. As a reminder, forgetting to put a flashing light is punishable by 3 point on the permit as well as a traffic ticket . Although some law enforcement officers are sometimes benevolent about it. It is therefore essential to have turn signals in good working order. We will therefore discover with this article how to replace the bulb of a Renault Grand Scenic 2 flashing light, at the front and rear. It is sometimes probable that the concern comes from a false contact, nevertheless it is relatively exceptional.change-turn signal-Renault-Grand-Scenic-2

Renault Grand Scenic 2: things to know before replacing your indicator

To start, it is essential to correctly select the type of bulb! In order not to be mistaken, we advise you to go to a spare parts site or to your mechanic who knows how to select them. Secondly, you will have to be careful to select the right color for your bulb. Subsequently, you will need to use a tools extremely simple but nevertheless essential. You will thus need a screwdriver for a Renault Grand Scenic 2. A set of cruciforms and torxes and you will surely be able to do it. In the majority of cases, the bulbs are bayonet . In order to remove the faulty bulb you will have to turn the bulb a quarter of a turn to the left. To install the new bulb, you must then turn a quarter of a turn in the other direction.

How to change the bulb of a front indicator on a Renault Grand Scenic 2

There are two main ways to access the flashing lights. It depends on the model, however accessibility can be done either from the outside or from the inside on this Renault Grand Scenic 2. Access from inside the engine : First of all, you will have to open the hood. Then, you will have to remove a cover with a screwdriver (regularly torx) in order to access the headlight unit. When the block is unscrewed, remove it and it is possible to replace your bulb. Wheel arch access : Look below the wheel to see if the clips are there. When this is the case, the clips must be disassembled and the screws removed with a screwdriver. Secondly, remove the headlight unit of this Renault Grand Scenic 2 gently from the front. You simply have to replace the bulb and position the block in the opposite direction. Less frequently, on some cars it is likely to remove the headlight assembly from the outside. But it is relatively rare. When this is the case, with a screwdriver it will be necessary to remove the fasteners, release the headlight unit slowly and replace the defective bulb.

How to change the bulb of a rear indicator on a Renault Grand Scenic 2

There are also two main ways to access your turn signal bulb. It may depend on the different types however accessibility can be done either from inside or from outside. Access from inside the trunk : Generally accessibility can be done from the trunk. For these headlight blocks there are screws and fixings. Take them out and take the room away slowly. Then you just have to replace your defective bulb with the new one. Then repeat this operation in reverse order. It is also likely that the accessibility could be from the outside or through the wheel arch. But it is much less common. Whatever happens, you need to take your screwdrivers and gently remove the entire headlight assembly so as to replace the bulb. To reassemble it, reverse the procedure.