Using flashing lights that are in good condition remains a legal requirement. As a reminder, not putting a flashing light is liable to 3 point on the permit as well as a fine . Although some police are sometimes complacent about this. It is therefore necessary to have flashing lights in good condition. We will see with this article how to change the bulb of a turn signal for a Renault Juvaquatre, front and rear. It is also possible that the problem originated from a short circuit, however it is rather exceptional.
Renault Juvaquatre: things to know before changing your turn signal
To start it is essential to correctly select your type of bulb! So as not to be mistaken, we advise you to go to a spare parts site or to your professional who can select them. Then you will have to be careful to select the right color for your bulb. Then you will need to use a tools super simple but still essential. You will therefore mainly need a screwdriver for a Renault Juvaquatre. A game of cruciform and torx and everything will be doable. Almost every time, the bulbs are bayonet . In order to remove the faulty bulb, you will have to turn the bulb a quarter of a turn anti-clockwise. In order to fix the new bulb, it is therefore necessary to rotate a quarter of a turn in the other direction.
How to change the bulb of a front indicator on a Renault Juvaquatre
There are two main solutions for accessing the turn signals. It depends on the different models, however accessibility can be done either outside or inside for your Renault Juvaquatre. Access from inside the engine : First, you will need to open your hood. Then, it will be necessary to unscrew a cover with a screwdriver (regularly torx) to access the block of lights. When the unit is unclipped, remove it and it is possible to change the bulb. Wheel arch access : Look below the wheel to see if the fasteners are there. If this is the case, you must disassemble the fasteners and remove the screws with the help of your screwdriver. Then remove the light block from your Renault Juvaquatre gently from the front. You simply need to change the bulb and replace the block by following the reverse procedure. More rarely, for some models it is possible to replace the light block from the outside. Nevertheless it is rather rare. In this case, with a screwdriver, you will need to remove the fixings, gently release the light unit and replace the defective bulb.
How to change the bulb of a rear indicator on a Renault Juvaquatre
There are also two main solutions for accessing your turn signal bulb. It depends on the different types, however accessibility can be done either from the inside or from the outside. Access from inside the trunk : Most of the time accessibility can be done from inside the trunk. At the level of the light blocks, there are screws and fixings. Remove them and remove the part slowly. Then simply replace the defective bulb with a new one. Then repeat this operation in the other direction. It is also possible that accessibility is made from the outside or through the wheel arch. However, it is much rarer. Whatever happens, you must bring your screwdrivers and gently remove the entire block of lights so as to change this bulb. To put it in place, take the opposite step.