Having working indicators remains a legal requirement. Think about it, not putting a turn signal is liable to 3 point on the permit as well as a traffic ticket . Even if certain agents of the law are sometimes benevolent on this point. It is therefore important to have indicators that work correctly. We will therefore see below how to change the bulb of a turn signal of a Renault Kangoo 2, front and rear. It is also likely that the problem stems from a bad contact, but it is rather exceptional.change-flashing-Renault-Kangoo-2

Renault Kangoo 2: things to know before changing your turn signal

First of all, it is wiser to correctly select the model of your bulb! So as not to be mistaken, we advise you to go to a spare parts website or to a mechanic who knows how to select them. Then you have to be careful to select the right color of the bulb. Subsequently, you will need to use a tools super simple but nonetheless essential. You will therefore mainly need a screwdriver for a Renault Kangoo 2. A set of cruciforms and torx and you will be able to do it. In most cases, the bulbs are at bayonet . To remove the damaged bulb, turn the bulb a quarter of a turn to the left. In order to install the new bulb, you will then have to turn it a quarter of a turn in the other direction.

How to change the bulb of a front indicator on a Renault Kangoo 2

There are two main ways to access the turn signals. It depends on the different models, but access can be done either from the outside or from the inside for your Renault Kangoo 2. Access from inside the engine : To start, you will have to open the hood. Then, you will have to remove a cover with a screwdriver (regularly torx) in order to access the headlight unit. When the block is unscrewed, remove it and you can change the bulb. Wheel arch access : Inspect under the wheel to see if the fasteners are in this location. If so, you will need to disassemble the fasteners and remove the screws with the help of your screwdriver. Then remove the headlight unit of the Renault Kangoo 2 slowly from the front. All you have to do is change your bulb and position the unit in the opposite direction. Exceptionally, for some cars it is still likely to replace the headlight unit from the outside. However it is rather rare. If this is the case, with a screwdriver you will have to dismantle the fixings, remove the headlight unit slowly and change your faulty bulb.

How to change the bulb of a rear indicator on a Renault Kangoo 2

There are also two main ways to access the turn signal bulb. It may depend on the models however the access can be done either from the inside or from the outside. Access from inside the trunk : Frequently access can be done from inside the boot. At the level of the headlight blocks, there are screws and fixings. Take them out and remove the block being careful. Subsequently, it will only be necessary to replace the faulty bulb with a new one. Then repeat the same manipulation in reverse order. It is also likely that the access is from the outside or under the wheel arch. However, it is much less frequent. Whatever happens, you will have to use your screwdrivers and gently remove the entire light unit in order to change this bulb. To put it in place, perform the opposite manipulation.