Having working flashing lights is a legal requirement. Remember, forgetting to put a flashing light is punishable by 3 point on your driver's license as well as a traffic ticket . Although some police officers are sometimes accommodating on this point. It therefore remains essential to have flashing lights in good working order. We will see below how to replace the bulb of a flashing light for a Seat 127, front and rear. It is sometimes likely that the problem comes from a short circuit, but it is relatively rare.change-flashing-Seat-127

Seat 127: things to know before replacing your turn signal

First of all it is important to correctly select your type of bulb! So as not to be mistaken, we advise you to go to a spare parts website or to your mechanic who can order them for you. In a second step you will have to be careful to select the right color for your bulb. Finally, you will need a tools super basic but still essential. You will mainly need a screwdriver for a Seat 127. A set of cruciform and torx and nothing can happen to you. Almost every time, the bulbs are bayonet . In order to dismantle the defective bulb you will have to rotate the bulb a quarter of a turn anticlockwise. In order to fix the new bulb, it will therefore be necessary to rotate a quarter turn in the opposite direction.

How to change the bulb of a front indicator on a Seat 127

There are two different solutions to access the flashing lights. Indeed, it depends on the models, but accessibility will be done either from the outside or from the inside for your Seat 127. Access from inside the engine : First, you will need to open the hood. Then, you will have to loosen the cover with the help of a screwdriver (frequently torx) to access the headlight unit. As soon as the block is unscrewed, remove it and do not hesitate to replace the bulb. Wheel arch access : Look under the wheel to see if the fasteners are there. When this is happening, you will have to disassemble the fixings and remove the screws with the help of your screwdriver. In the second step, remove the headlight unit from your Seat 127 slowly from the front. It is now enough to replace your bulb and reattach the light block in the opposite direction. Exceptionally, for some cars it is likely to remove the headlight unit from the outside. However, it is relatively rare. When this is happening, with the help of a screwdriver you will have to dismantle the fixings, remove the headlight unit quietly and change your faulty bulb.

How to change the bulb of a rear indicator on a Seat 127

There are also two different solutions for accessing the turn signal bulb. It depends on the models however the accessibility will be done either inside or outside. Access from inside the trunk : Most of the time accessibility will be through the interior of the trunk. At the headlight blocks, you will find screws and fixings. Remove them and remove the block slowly. Finally you will simply have to change the faulty bulb with the new one. Then repeat this operation in reverse. It also remains likely that accessibility can be from the outside or under the wheel arch. However, it is much rarer. Whatever happens, you will need to use your screwdriver and carefully remove the entire light unit so as to replace this bulb. To set it up, take the opposite approach.