Having working indicators remains mandatory. Remember, not putting a flashing light is liable to 3 point on the permit as well as a fine . Although some police officers are regularly complacent on this point. It is therefore necessary to have indicators in good condition. We will therefore find out here below how to change the bulb of a Seat Ginebra indicator, front and rear. It is sometimes possible that the problem comes from a short circuit, but this is still rather exceptional.change-flashing-Seat-Ginebra

Seat Ginebra: things to know before changing your turn signal

Firstly, it is essential to buy the model of your bulb! So as not to be mistaken, we advise you to go to a spare parts site or to your garage which will be able to order them for you. In the second step, you will have to think about choosing the right color of the bulb. Then you will need a tools super simple but still necessary. You will therefore mainly need a screwdriver for a Seat Ginebra. A cruciform and torx kit and everything will be doable. Generally, the bulbs are at bayonet . To be able to dismantle the defective bulb it will be necessary to rotate the bulb a quarter of a turn anticlockwise. In order to fix the new bulb, it will thus be necessary to rotate a quarter of a turn in the other direction.

How to change the bulb of a front indicator on a Seat Ginebra

There are two main ways to access the turn signals. It depends on the models, but access can be done either from the outside or from the inside on a Seat Ginebra. Access from inside the engine : First, you have to open your hood. And then, it is necessary to unscrew the cover with a screwdriver (regularly torx) in order to access the block of lights. When the unit is unclipped, remove it and it is possible to change your bulb. Wheel arch access : Look below the wheel to see if the fasteners are there. If this is the case, you will have to disassemble the fasteners and remove the screws with the help of your screwdriver. In the second step, remove the light block from your Seat Ginebra slowly from the front. You simply need to change your bulb and put the light block in the other direction. Less frequently, on some models it is possible to remove the light block from the outside. Nevertheless it is rather rare. If this is the case, with a screwdriver you will have to disassemble the fixings, gently remove the light block and replace your defective bulb.

How to change the bulb of a rear indicator on a Seat Ginebra

There are also two main ways to access this turn signal bulb. It depends on the range but access can be done either from the inside or from the outside. Access from inside the trunk : Frequently access can be done from the trunk. At the headlight blocks, there are screws and fasteners. Remove them and lay the block down slowly. Then it is only necessary to replace your defective bulb with a new one. And then repeat this operation in reverse. It also remains possible that access is from the outside or via the wheel arch. However, it is much rarer. Whatever happens, you will need to use your screwdriver and carefully remove the entire block of lights in order to change this bulb. To reassemble, perform the reverse manipulation.