Having flashing lights which are in good condition remains compulsory. Think about it, omitting a flashing light is liable to 3 point on your driver's license as well as a fine . Even if some police officers are at times benevolent on this subject. It is therefore important to have flashing lights in good condition. We will now see how to change the bulb of a turn signal for a Suzuki Alto, at the front and the rear. Sometimes it is possible that the dysfunction stems from a bad contact, but it is relatively rare.change-flashing-Suzuki-Alto

Suzuki Alto: things to know before changing your turn signal

Above all, it is important to choose the right type of bulb! In order not to be mistaken, we advise you to go to a spare parts website or to your auto repairer who knows how to order them for you. Then you will have to be careful to select the right color for your bulb. Subsequently, you will need to use a tools super simple but still essential. You will therefore need a screwdriver for a Suzuki Alto. A cruciform and torx game and nothing can happen to you. Generally, the bulbs are at bayonet . In order to take out the faulty bulb, you will have to rotate the latter a quarter of a turn counterclockwise. In order to fix the new bulb, it will then be necessary to rotate it a quarter of a turn in the opposite direction.

How to change the bulb of a front turn signal on a Suzuki Alto

There are two different ways to access the turn signals. It depends on the model, but access can be done either from the outside or from the inside for this Suzuki Alto. Access from inside the engine : To start, you will have to open the hood. And then you have to remove a cover using a screwdriver (frequently torx) to access the light assembly. Now that the block is unscrewed, remove it and it is possible to change your bulb. Wheel arch access : Look under the wheel to see if the fasteners are there. If this is the case, you will have to dismantle the fixings and remove the screws with the help of your screwdriver. Subsequently remove the light block of this Suzuki Alto slowly from the front. You simply need to change your bulb and position the light unit in the opposite direction. More rarely, for some cars it is possible to remove the light unit from the outside. However, it is relatively rare. In the event that this is the case, using a screwdriver you will have to disassemble the fasteners, remove the light unit slowly and change your burnt out bulb.

How to change the bulb of a rear indicator on a Suzuki Alto

There are also two different ways to access this turn signal bulb. It may depend on the different types however access can be done either from the inside or from the outside. Access from inside the trunk : Generally access can be done from the trunk. Regarding the light blocks, there are screws and fasteners. Take them out and remove the block being careful. Then you just have to change your burnt out bulb with the new one. And then repeat the same manipulation in the opposite direction. It is also possible that access is from the outside or through the wheel arch. However, it is much rarer. Whatever happens, you will have to use your screwdrivers and carefully remove the entire headlight unit so as to change your bulb. To reassemble it, do the opposite.