Having flashing lights which are in good condition remains compulsory. As a reminder, not putting a flashing light is liable to 3 point on the permit as well as a fine . Although some police are sometimes sympathetic on this point. It therefore remains essential to have flashing lights that work properly. We will see below how to change the bulb of a turn signal for a Suzuki Baleno, front and rear. It is also conceivable that the problem comes from a short circuit, however it is relatively exceptional.
Suzuki Baleno: things to know before changing your turn signal
Above all it is wiser to correctly buy the model of your bulb! In order not to be mistaken, it is advisable to go to a spare parts site or to a mechanic who knows how to order them for you. Then it is necessary to think about choosing the right color for your bulb. Then you will need a tools super basic but still necessary. You will therefore mainly need a screwdriver for a Suzuki Baleno. A game of cruciform and torx and you will be able to do it. In most cases, the bulbs are at bayonet . So as to be able to dismantle the damaged bulb, it will be necessary to rotate the latter by a quarter of a turn anticlockwise. In order to put the new bulb, you will have to rotate it a quarter of a turn in the other direction.
How to change the bulb of a front indicator on a Suzuki Baleno
There are two main solutions for accessing the indicators. Indeed, it depends on the different models, however access will be either from the outside or from the inside for a Suzuki Baleno. Access from inside the engine : First, you will need to open the hood. And then you need to remove a cover with a screwdriver (regularly torx) to access the headlight unit. Now that the block is unclipped, remove it and you can change this bulb. Wheel arch access : Look below the wheel to see if the clips are there. If this is right, you will have to undo the hooks and remove the screws using a screwdriver. Then remove the headlight block from the Suzuki Baleno delicately from the front. All you have to do is change your bulb and position the light block following the reverse procedure. Exceptionally, for some models it is conceivable to remove the headlight unit from the outside. However, it is relatively rare. If that's right, with a screwdriver you will have to disassemble the fasteners, gently release the headlight unit and change your defective bulb.
How to change the bulb of a rear indicator on a Suzuki Baleno
There are also two main solutions for accessing your turn signal bulb. It depends on the range, however access will be either from the inside or from the outside. Access from inside the trunk : Almost every time access will be through the interior of the trunk. Regarding the light blocks, you will find screws and fasteners. Remove them and remove the block slowly. Then you just have to replace this defective bulb with a new one. And then repeat the same manipulation in the other direction. It also remains conceivable whether access is from the outside or through the wheel arch. However, it is much rarer. Whatever happens, you will have to use your screwdriver and gently remove the entire headlight unit in order to change this bulb. To put it in place, proceed to the opposite step.