Having working indicators remains an obligation of the law. Think about it, omitting a flashing light is punishable by 3 point on your driver's license as well as a fine . Although some law enforcement officers are complacent about this at times. It is therefore essential to have indicators in good working order. We will find out below how to change the bulb of a flashing light of Suzuki Carry, at the front and the rear. It is sometimes possible that the problem comes from a short circuit, however it is quite exceptional.
Suzuki Carry: things to know before changing your turn signal
At first it is essential to buy the model of your bulb! So as not to be mistaken, it is advisable to go to a spare parts website or to your car repairer who knows how to order them for you. Then you will have to think about choosing the right color for the bulb. Finally, you will need to use a tools super basic but still essential. You will therefore mainly need a screwdriver for a Suzuki Carry. A game of cruciform and torx and you will be able to do it. Almost every time, the bulbs are bayonet . In order to dismantle the broken bulb, you will have to rotate the bulb a quarter of a turn anti-clockwise. In order to fix the new bulb, it is therefore necessary to rotate it a quarter turn in the opposite direction.
How to change the bulb of a front indicator on a Suzuki Carry
There are two different solutions for accessing the indicators. It depends on the different models, however access will be either from the outside or from the inside on a Suzuki Carry. Access from inside the engine : First, you have to open your hood. Then, you must loosen the cover with the help of a screwdriver (most often torx) to access the light block. When the block is unclipped, remove it and you can change the bulb. Wheel arch access : Look below the wheel to see if the fixings are there. If this is the case, it is necessary to undo the fasteners and remove the screws with a screwdriver. Then remove the light block of this Suzuki Carry gently from the front. You just need to change the bulb and put the light block back in the reverse order. Exceptionally, on some models it is possible to remove the light block from the outside. But it is quite rare. If this is the case, with the help of a screwdriver you will need to remove the fasteners, remove the block of lights quietly and change the burnt out bulb.
How to change the bulb of a rear indicator on a Suzuki Carry
There are also two different solutions for accessing this turn signal bulb. It depends on the different types but access will be either from inside or outside. Access from inside the trunk : Almost every time access will be from the trunk. For these headlight blocks, there are screws and fasteners. Remove them and gently remove the block. To finish it is only necessary to change the burnt out bulb with a new one. Then repeat the same manipulation in reverse. It is also possible that access is from the outside or under the wheel arch. But it is much less frequent. Whatever happens, it is necessary to bring your screwdrivers and gently remove the entire block of lights so as to change the bulb. To put it in place, perform the reverse manipulation.