Using direction indicators that are in good condition is a legal requirement. Think about it, omitting a flashing light is liable to 3 point on your driver's license as well as a fine . Although some police officers are sometimes accommodating on this point. It is therefore essential to have indicators in good condition. We will therefore see below how to change the bulb of a turn signal for a Suzuki Grand Vitara Evolution, front and rear. It is sometimes conceivable that the problem comes from a short circuit, however it is relatively exceptional.
Suzuki Grand Vitara Evolution: things to know before changing your turn signal
First of all, it is essential to correctly select your type of bulb! In order not to be mistaken, we advise you to go to a spare parts site or to a professional who knows how to select them. Then we will have to think about selecting the right color of the bulb. Then you will need a tools extremely basic but still essential. You will therefore need a screwdriver for a Suzuki Grand Vitara Evolution. A cruciform and torx game and nothing can happen to you. Most of the time, the bulbs are at bayonet . In order to remove the damaged bulb, the bulb must be turned a quarter of a turn anticlockwise. In order to fix the new bulb, you will have to rotate it a quarter of a turn in the opposite direction.
How to change the bulb of a front indicator on a Suzuki Grand Vitara Evolution
There are two different ways to get to the flashing lights. Indeed, it depends on the different models, however accessibility can be done either from the outside or from the inside on your Suzuki Grand Vitara Evolution. Access from inside the engine : First, open your hood. Then, you will have to unscrew a cover with a screwdriver (usually torx) in order to access the headlight unit. When the block is unscrewed, remove it and it is possible to change this bulb. Wheel arch access : Check underneath the wheel to see if the fasteners are there. If so, you will need to remove the fasteners and remove the screws with a screwdriver. Then remove the headlight unit from this Suzuki Grand Vitara Evolution slowly from the front. It is now enough to change your bulb and reattach the block of lights following the opposite procedure. Less frequently, on certain models it is conceivable to remove the headlight unit from the outside. However, it is relatively rare. If this is the case, with a screwdriver you will have to remove the fasteners, remove the headlight unit slowly and change your defective bulb.
How to change the bulb of a rear indicator on a Suzuki Grand Vitara Evolution
There are also two different ways to access this turn signal bulb. It can depend on the ranges, however accessibility can be done either from inside or outside. Access from inside the trunk : Frequently accessibility can be done from inside the trunk. For these headlight blocks, there are screws and fasteners. Remove them and remove the piece gently. Then it will only be necessary to replace this defective bulb with the new one. Then repeat this operation in the other direction. It is also conceivable that accessibility can be from the outside or through the wheel arch. However, it is much less frequent. In all cases, you will need to take your screwdriver and carefully remove the entire headlight unit so as to change this bulb. To put it in place, do the reverse manipulation.