Having working flashing lights is mandatory. Think about it, not putting a turn signal is liable to 3 point on the permit as well as a traffic ticket . Although some police officers are from time to time benevolent on this point. It is therefore essential to have the flashing lights in good condition. So we will now see how to replace the bulb of a flashing light on a Suzuki Grand Vitara Xl-7, front and rear. It is also conceivable that the malfunction is due to a short circuit, however it is quite rare.
Suzuki Grand Vitara Xl-7: things to know before replacing your indicator
First of all, it is essential to choose the right type of bulb! In order not to be mistaken, we advise you to go to a spare parts website or to a professional who will be able to order them for you. Then it is necessary to think about selecting the right color of the bulb. Subsequently, you will need to use a tools very basic but nevertheless essential. You will therefore need a screwdriver for a Suzuki Grand Vitara Xl-7. A set of cruciforms and torxes and you are bound to be able to do it. Almost every time, the bulbs are bayonet . To be able to remove the faulty bulb, it must be turned a quarter of a turn anti-clockwise. To install the new bulb, you will have to turn it a quarter of a turn in the other direction.
How to change the bulb of a front turn signal on a Suzuki Grand Vitara Xl-7
There are two different solutions to achieve the flashing lights. It depends on the model, however accessibility can be done either from the outside or from the inside on this Suzuki Grand Vitara Xl-7. Access from inside the engine : To begin with, you will need to open the hood. Then, you will have to remove a cover using a screwdriver (regularly torx) to access the headlight unit. When the block is unclipped, remove it and you can replace the bulb. Wheel arch access : Look under the wheel to see if the fasteners are there. When this is correct, you will need to disassemble the fasteners and remove the screws using a screwdriver. Then remove the headlight unit of this Suzuki Grand Vitara Xl-7 slowly from the front. Now all you have to do is replace the bulb and position the block in the reverse order. More rarely, on some models it is conceivable to remove the headlight unit from the outside. However, it is quite rare. When that's it, using a screwdriver you will have to disassemble the fasteners, remove the headlight unit gently and replace the burnt out bulb.
How to change the bulb of a rear indicator on a Suzuki Grand Vitara Xl-7
There are also two different solutions for accessing the turn signal bulb. This may depend on the ranges, however accessibility can be done either from the inside or from the outside. Access from inside the trunk : Most of the time, accessibility can be done from inside the boot. Regarding the light blocks, you will find screws and fasteners. Take them out and gently remove the part. Subsequently you will simply have to replace the burnt out bulb with the new one. Then repeat the same manipulation in the other direction. It is also conceivable that accessibility could be from the outside or through the wheel arch. However, it is much rarer. Whatever happens, you will have to bring your screwdriver and remove, being careful, the entire headlamp assembly in order to replace this bulb. To reassemble it, reverse the procedure.