Use of indicators which are in good condition remains compulsory. Remember, forgetting to put a flashing light is punishable by 3 point on the permit as well as a traffic ticket . Even if some law enforcement officers are sympathetic to the matter at times. It is therefore necessary to have indicators in good condition. We will find out with this article how to replace the bulb of a flashing light for a Suzuki Grand Vitara, front and rear. It is also conceivable that the dysfunction comes from a false contact, nevertheless it is relatively rare.change-flashing-Suzuki-Grand-Vitara

Suzuki Grand Vitara: things to know before replacing its indicator

To start it is important to correctly select the model of your bulb! In order not to be mistaken, we advise you to go to a spare parts website or to your garage which knows how to order them for you. In the second time it will be necessary to think of selecting the right color of the bulb. Finally, you will need to use a tools super simple but still necessary. You will therefore mainly need a screwdriver for a Suzuki Grand Vitara. A cruciform and torx kit and everything will be doable. Most of the time, the bulbs are at bayonet . In order to remove the damaged bulb, the bulb must be turned a quarter of a turn anticlockwise. To install the new bulb, you have to turn it a quarter of a turn in the other direction.

How to change the bulb of a front indicator on a Suzuki Grand Vitara

There are two main solutions to access the flashing lights. Indeed, it depends on the models, however accessibility can be done either from the outside or from the inside on a Suzuki Grand Vitara. Access from inside the engine : First, you will have to open the hood. And then, you will have to unscrew a cover using a screwdriver (often torx) to access the light block. Now that the block is unscrewed, remove it and it is possible to replace this bulb. Wheel arch access : Inspect below the wheel to see if the fasteners are there. When this happens, remove the fasteners and remove the screws with a screwdriver. Then remove the light block of the Suzuki Grand Vitara gently from the front. You simply need to replace your bulb and put the light block back in the opposite direction. Exceptionally, on certain models it is conceivable to replace the block of lights by the outside. However, it is relatively rare. When this is happening, using a screwdriver you will need to remove the fixings, gently release the light block and replace your defective bulb.

How to change the bulb of a rear indicator on a Suzuki Grand Vitara

There are also two main solutions for accessing the turn signal bulb. It depends on the different types but accessibility can be done either from inside or outside. Access from inside the trunk : Most of the time accessibility can be done from inside the trunk. Regarding the light blocks, there are screws and fixings. Remove them and lay the piece gently. Finally you will simply have to replace this defective bulb with the new one. And then repeat this operation in the other direction. It is also conceivable that accessibility is done from the outside or under the wheel arch. However, it is much less frequent. In all cases, you must use your screwdriver and carefully remove the entire headlight unit so as to replace the bulb. To reassemble, proceed to the opposite step.