Having working flashing lights remains mandatory. Remember, not putting a flashing light is liable to 3 point on the permit as well as a traffic ticket . Even if some police officers are regularly complacent on this point. It is therefore essential to have flashing lights in good working order. We will therefore discover in this article how to replace the bulb of a flashing light on a Suzuki Ignis 2, at the front and rear. It is sometimes conceivable that the concern comes from a short circuit, nevertheless it is rather exceptional.change-flashing-Suzuki-Ignis-2

Suzuki Ignis 2: things to know before replacing your turn signal

First of all, it is essential to properly select the type of bulb! So as not to be mistaken, we advise you to go to a spare parts site or to a mechanic who can order them for you. Then you will have to think about choosing the right color for the bulb. Thereafter, you will need a tools extremely basic but still essential. You will therefore mainly need a screwdriver for a Suzuki Ignis 2. A cruciform and torx kit and everything will be doable. In most cases, the bulbs are at bayonet . In order to remove the faulty bulb you will have to rotate the bulb a quarter of a turn to the left. In order to fit the new bulb, you will have to rotate it a quarter of a turn in the opposite direction.

How to change the bulb of a front turn signal on a Suzuki Ignis 2

There are two main ways to access the flashing lights. It depends on the different models, however access can be done either from the outside or from the inside for your Suzuki Ignis 2. Access from inside the engine : First of all, you will have to open your hood. Then, you will have to remove the cover with a screwdriver (usually torx) to access the headlight assembly. As soon as the block is unclipped, remove the latter and do not hesitate to replace this bulb. Wheel arch access : Check under the wheel to see if the clips are in this location. In case this is correct, you will have to remove the fasteners and remove the screws using a screwdriver. Secondly, remove the headlight unit of your Suzuki Ignis 2 slowly from the front. Now all you have to do is replace the bulb and position the block in the opposite direction. Exceptionally, for some cars it is conceivable to remove the headlight assembly from the outside. However it is rather rare. If this is correct, with a screwdriver you will have to remove the fasteners, remove the headlight unit quietly and change the faulty bulb.

How to change the bulb of a rear indicator on a Suzuki Ignis 2

There are also two main ways to access the turn signal bulb. It depends on the ranges but access can be done either from the inside or from the outside. Access from inside the trunk : In most cases, access can be done from inside the safe. At the headlight blocks, you will find screws and fasteners. Take them out and gently remove the coin. Subsequently, you will simply have to replace this faulty bulb with a new one. Then repeat the same manipulation in reverse order. It is also conceivable that the access is from the outside or under the wheel arch. However, it is much rarer. Whatever happens, you will need to take your screwdrivers and carefully remove the light assembly assembly in order to replace the bulb. To set it up, perform the reverse process.