Using working indicators remains a legal obligation. As a reminder, omitting a flashing light is liable to 3 point on your driver's license as well as a fine . Even if some police officers are sympathetic at times on this subject. It is therefore necessary to have indicators that work properly. We will now discover how to replace the bulb of a flashing light for a Suzuki Kizashi, at the front and the rear. It is sometimes possible that the problem comes from a short circuit, however this remains relatively rare.change-flashing-Suzuki-Kizashi

Suzuki Kizashi: things to know before replacing your turn signal

To start with, it's wiser to choose the right bulb model! In order not to be mistaken, we advise you to go to a spare parts site or to your garage which will be able to order them for you. Thereafter you will have to be careful to choose the right color for your bulb. Then you will need a tools extremely simple but nevertheless essential. You will therefore need a screwdriver for a Suzuki Kizashi. A cruciform and torx kit and nothing can happen to you. In most cases, the bulbs are at bayonet . In order to take out the broken bulb you will have to turn the bulb a quarter of a turn anticlockwise. In order to install the new bulb, you will have to turn it a quarter of a turn in the other direction.

How to change the bulb of a front indicator on a Suzuki Kizashi

There are two different solutions for achieving the flashing lights. It depends on the different models, however access can be done either from the outside or from the inside for this Suzuki Kizashi. Access from inside the engine : First of all, you will have to open the hood. And then, you must unscrew a cover with the help of a screwdriver (usually torx) in order to access the light block. Now that the block is unscrewed, remove it and it is possible to replace this bulb. Wheel arch access : Check under the wheel to see if the fasteners are there. When that's right, you will need to disassemble the fixings and remove the screws with a screwdriver. Then remove the light block from the Suzuki Kizashi gently from the front. You simply need to replace your bulb and position the block in the opposite direction. Less frequently, for some models it is still possible to remove the light block from the outside. But it is relatively rare. When this is right, with the help of a screwdriver you will have to remove the fasteners, remove the light block gently and replace your faulty bulb.

How to change the bulb of a rear indicator on a Suzuki Kizashi

There are also two different solutions for accessing the turn signal bulb. It depends on the different types but access can be done either from the inside or from the outside. Access from inside the trunk : In most of the cases the access can be done from the trunk. For these light blocks, you will find screws and fasteners. Remove them and remove the block, being careful. Then you just need to replace this faulty bulb with a new one. And then repeat the same manipulation in the other direction. It is also possible that access is from the outside or under the wheel arch. But it is much less frequent. Whatever happens, you will need to take your screwdrivers and carefully remove the entire headlight assembly in order to replace this bulb. To reassemble, perform the opposite manipulation.