Having flashing lights that are in good condition is a legal requirement. Think about it, not putting a flashing light is punishable by 3 point on the permit as well as a traffic ticket . Although some law enforcement officials are sometimes complacent about this. It is therefore essential to have flashing lights in good condition. We will see with this article how to change the bulb of a flashing light of a Suzuki Liana, front and rear. It is also likely that the malfunction comes from a false contact, but this remains relatively exceptional.change-flashing-Suzuki-Liana

Suzuki Liana: things to know before changing your turn signal

At first it is wiser to correctly buy your type of bulb! In order not to be mistaken, we advise you to go to a spare parts website or to a professional who can select them. Secondly, you will have to think about selecting the right color for your bulb. Finally, you will need to use a tools very simple but nevertheless essential. You will need a screwdriver for a Suzuki Liana. A game of cruciform and torx and everything will be doable. Most of the time, the bulbs are at bayonet . In order to be able to dismantle the faulty bulb, it is necessary to rotate the bulb a quarter of a turn anticlockwise. In order to fix the new bulb, you will therefore have to rotate a quarter of a turn in the other direction.

How to change the bulb of a front indicator on a Suzuki Liana

There are two main ways to access the flashing lights. It depends on the models, but access will be either from the outside or from the inside for this Suzuki Liana. Access from inside the engine : To start, you will need to open your hood. Then, you will have to unscrew a cover using a screwdriver (most often torx) to access the light block. Once the block is unscrewed, remove it and it is possible to change your bulb. Wheel arch access : Look below the wheel to see if the clips are there. If this is the case, you will have to remove the hooks and remove the screws with the help of your screwdriver. Secondly remove the light unit from your Suzuki Liana gently from the front. You simply need to change your bulb and replace the block by following the reverse procedure. Less frequently, for some cars it is likely to remove the light block from the outside. However, it is relatively rare. If this is the case, using a screwdriver you will have to disassemble the fixings, remove the block of lights quietly and change your faulty bulb.

How to change the bulb of a rear indicator on a Suzuki Liana

There are also two main ways to access this turn signal bulb. It can depend on the different types however the access will be done either inside or outside. Access from inside the trunk : Generally access will be through the interior of the trunk. Regarding the headlight units, there are screws and fixings. Remove them and remove the part, being careful. Finally you will simply have to replace your faulty bulb with a new one. Then repeat this operation in reverse. It is also likely that access is from the outside or under the wheel arch. However, it is much less frequent. In all cases, you will have to use your screwdriver and remove, being careful, the entire headlight unit in order to change this bulb. To reassemble, do the reverse manipulation.