Having working flashing lights is mandatory. As a reminder, omitting a flashing light is punishable by 3 point on your driver's license as well as a fine . Although some law enforcement officials are sometimes lenient on this point. It is therefore essential to have flashing lights that work properly. So we will see in this article how to change the bulb of a indicator of Suzuki Samurai, front and rear. It is also conceivable that the concern comes from a short circuit, nevertheless it remains rather exceptional.change-flashing-Suzuki-Samurai

Suzuki Samurai: things to know before changing your turn signal

Firstly it is important to correctly select your type of bulb! So as not to be mistaken, we advise you to go to a spare parts website or to your car repairer who can order them for you. In a second step it is necessary to be careful to choose the right color of the bulb. Then you will need a tools super basic but still essential. You will mainly need a screwdriver for a Suzuki Samurai. A kit of cruciform and torx and you will necessarily be able to get there. In most cases, the bulbs are at bayonet . In order to dismantle the faulty bulb, you will have to turn the bulb a quarter of a turn to the left. In order to install the new bulb, it is then necessary to turn it a quarter turn in the opposite direction.

How to change the bulb of a front indicator on a Suzuki Samurai

There are two main ways to get to the turn signals. Indeed, it depends on the models, however access can be done either from the outside or from the inside for this Suzuki Samurai. Access from inside the engine : First of all, you have to open your hood. And then, you must remove the cover with a screwdriver (regularly torx) to access the light block. Once the block is unclipped, remove it and it is possible to change the bulb. Wheel arch access : Look under the wheel to see if the fasteners are there. If this is correct, it is necessary to disassemble the fasteners and remove the screws with the help of your screwdriver. In a second step, carefully remove the light block from your Suzuki Samurai from the front. You simply have to change the bulb and position the light block in the other direction. Exceptionally, for certain models it is conceivable to remove the block of lights from the outside. But it is rather rare. If this is right, with a screwdriver you will have to remove the fasteners, remove the light block slowly and replace the burnt out bulb.

How to change the bulb of a rear indicator on a Suzuki Samurai

There are also two main ways to access the turn signal bulb. It depends on the models, however access can be done either from the inside or from the outside. Access from inside the trunk : Frequently access can be done from inside the trunk. Regarding the light blocks, you will find screws and fasteners. Take them out and remove the block, being careful. Then you only need to replace the burnt out bulb with the new one. And then repeat the same manipulation in the other direction. It is also conceivable that access is from the outside or under the wheel arch. But it is much rarer. In all cases, it is necessary to use your screwdriver and carefully remove the entire block of lights so as to change this bulb. To set it up, take the opposite step.