Having working flashing lights remains a legal requirement. Think about it, forgetting to put a turn signal is punishable by 3 point on the permit as well as a fine . Even if some law enforcement officials are regularly complacent about this. It is thus necessary to have flashing lights in good condition. We will therefore discover with this article how to change the bulb of a flashing light of a Suzuki Splash, front and rear. It is sometimes likely that the concern comes from a false contact, however it remains relatively exceptional.change-flashing-Suzuki-Splash

Suzuki Splash: things to know before changing your turn signal

Above all it is important to choose the right type of bulb! In order not to be mistaken, we advise you to go to a spare parts website or to your mechanic who will be able to select them. Then we will have to be careful to choose the right color of the bulb. Thereafter, you will need a tools super simple but still essential. You will therefore mainly need a screwdriver for a Suzuki Splash. A game of cruciform and torx and everything will be doable. Generally, the bulbs are at bayonet . In order to be able to dismantle the broken bulb it will be necessary to rotate the bulb a quarter of a turn to the left. In order to put the new bulb, it will then be necessary to rotate a quarter of a turn in the opposite direction.

How to change the bulb of a front indicator on a Suzuki Splash

There are two main ways to get to the flashing lights. It depends on the different models, however accessibility can be done either from the outside or from the inside on a Suzuki Splash. Access from inside the engine : First, you will have to open the hood. And then, you must unscrew a cover with the help of a screwdriver (usually torx) in order to access the light block. When the unit is unclipped, remove it and you can change your bulb. Wheel arch access : Look below the wheel to see if the fasteners are there. If this is right, you will have to undo the hooks and remove the screws with the help of your screwdriver. Then remove the light block from the Suzuki Splash gently from the front. Now just change your bulb and reattach the light block in reverse. Exceptionally, on certain cars it is likely to replace the light block from the outside. But it is relatively rare. If this is right, with the help of a screwdriver, you will have to disassemble the fasteners, release the light block quietly and change your defective bulb.

How to change the bulb of a rear indicator on a Suzuki Splash

There are also two main ways to access the turn signal bulb. It depends on the different types, however accessibility can be done either from the inside or from the outside. Access from inside the trunk : Most of the time accessibility can be done from inside the trunk. At the light blocks, there are screws and fasteners. Take them out and put the piece down, being careful. Then you just have to replace your defective bulb with a new one. And then repeat the same manipulation in the other direction. It is also likely that accessibility can be from the outside or through the wheel arch. But it is much rarer. Whatever happens, you will have to take your screwdriver and gently remove the entire block of lights so as to change this bulb. To reassemble, take the opposite step.