Having flashing lights that are in good condition is a legal requirement. Remember, not putting a flashing light is liable to 3 point on your driver's license as well as a traffic ticket . Although some police officers are indulgent from time to time on this subject. It therefore remains essential to have flashing lights in good condition. We will now see how to change the bulb of a flashing light of a Suzuki Swift 4, at the front and the rear. It is also possible that the concern comes from a false contact, but it is quite exceptional.change-flashing-Suzuki-Swift-4

Suzuki Swift 4: things to know before changing your turn signal

To start with it is wiser to correctly select the model of your bulb! So as not to be mistaken, we advise you to go to a spare parts website or to your garage which will be able to order them for you. In a second step it will be necessary to pay attention to select the right color of the bulb. Then you will need a tools very simple but still essential. You will therefore need a screwdriver for a Suzuki Swift 4. A cruciform and torx kit and everything will be doable. Most of the time, the bulbs are at bayonet . In order to remove the faulty bulb, you must rotate the bulb a quarter of a turn to the left. In order to fix the new bulb, it will therefore be necessary to rotate a quarter of a turn in the other direction.

How to change the bulb of a front indicator on a Suzuki Swift 4

There are two main solutions for accessing the flashing lights. Indeed, it depends on the models, but access can be done either from the outside or from the inside on your Suzuki Swift 4. Access from inside the engine : To start, you need to open your hood. Then, you will have to unscrew a cover with the help of a screwdriver (often torx) in order to access the block of lights. Now that the block is unclipped, remove it and it is possible to change your bulb. Wheel arch access : Check underneath the wheel to see if the fasteners are there. If this is the case, you will have to disassemble the hooks and remove the screws with the help of your screwdriver. Then remove the light block of this Suzuki Swift 4 slowly from the front. All you have to do is change the bulb and position the light block in the opposite direction. More rarely, on some models it is still possible to remove the light block from the outside. However it is quite rare. In this case, with the help of a screwdriver, you will need to remove the fasteners, remove the light block quietly and change the burnt out bulb.

How to change the bulb of a rear indicator on a Suzuki Swift 4

There are also two main solutions to access this turn signal bulb. It may depend on the models but access can be done either from the inside or from the outside. Access from inside the trunk : In most of the cases the access can be done from the safe. Regarding the light blocks, there are screws and fasteners. Remove them and lay the piece down slowly. Then you will just have to change your burnt out bulb for a new one. Then repeat this operation in reverse. It also remains possible that access can be from the outside or through the wheel arch. However, it is much rarer. In all cases, you will need to use your screwdriver and gently remove the entire light block so as to change the bulb. To reassemble, reverse the process.