Having working indicators is mandatory. Remember, forgetting to put a flashing light is punishable by 3 point on your driver's license as well as a traffic ticket . Although some law enforcement officials are sometimes complacent about this. It is therefore essential to have indicators in good condition. We will now find out how to replace the bulb of a flashing light for a Suzuki Sx4 S-cross, at the front and the rear. It is also conceivable that the problem comes from a short circuit, however it remains quite rare.
Suzuki Sx4 S-cross: things to know before replacing its indicator
First of all, it is essential to choose the right bulb model! In order not to be mistaken, we advise you to go to a spare parts site or to a garage which can select them. Secondly, it is necessary to think about choosing the right color for the bulb. Finally, you will need a tools very simple but nevertheless essential. You will need a screwdriver for a Suzuki Sx4 S-cross. A game of cruciform and torx and everything will be doable. Generally, the bulbs are at bayonet . In order to remove the broken bulb it will be necessary to rotate the bulb a quarter of a turn to the left. To put the new bulb, you will have to turn it a quarter of a turn in the opposite direction.
How to change the bulb of a front indicator on a Suzuki Sx4 S-cross
There are two main ways to get to the turn signals. It depends on the different models, however accessibility can be done either from the outside or from the inside on a Suzuki Sx4 S-cross. Access from inside the engine : First of all, you will have to open your hood. And then, it is necessary to loosen the cover with the help of a screwdriver (usually torx) to access the headlight unit. When the block is unscrewed, remove it and it is possible to replace your bulb. Wheel arch access : Look below the wheel to see if the clips are there. If that's right, you will need to remove the fasteners and remove the screws using a screwdriver. In the second step, remove the headlight unit from your Suzuki Sx4 S-cross gently from the front. You just need to replace your bulb and position the block the other way around. Less frequently, on certain models it is conceivable to remove the headlight unit from the outside. But it is quite rare. If that's right, with the help of a screwdriver you will need to remove the fasteners, release the headlight block quietly and change your defective bulb.
How to change the bulb of a rear indicator on a Suzuki Sx4 S-cross
There are also two main ways to access the turn signal bulb. It can depend on the models, however accessibility can be done either from inside or outside. Access from inside the trunk : Generally accessibility can be done from the trunk. For these light blocks, you will find screws and fasteners. Remove them and lay the piece gently. To finish it is necessary to simply change your defective bulb with the new one. And then repeat the same manipulation in reverse. It is also conceivable that accessibility is from the outside or through the wheel arch. But it is much rarer. Whatever happens, you will need to bring your screwdriver and remove the entire headlight assembly with care, in order to replace your bulb. To reassemble, do the reverse manipulation.