Using working indicators remains a legal obligation. Remember, forgetting to put a turn signal is punishable by 3 point on your driver's license as well as a fine . Although some law enforcement officials are regularly sympathetic to this matter. It therefore remains essential to have indicators that work properly. We will see below how to replace the bulb of a flashing light for Suzuki Sx4, front and rear. It is also conceivable that the malfunction comes from a short circuit, but this remains relatively exceptional.
Suzuki Sx4: things to know before replacing its indicator
Above all it is essential to correctly select the model of your bulb! So as not to be mistaken, we advise you to go to a spare parts site or to a garage which can select them. Then you have to be careful to select the right color of the bulb. Thereafter, you will need to use a tools super basic but still essential. You will therefore need a screwdriver for a Suzuki Sx4. A cruciform and torx kit and everything will be doable. In most cases, the bulbs are at bayonet . In order to remove the faulty bulb it will have to be turned a quarter of a turn to the left. So to put the new bulb, you will then have to turn a quarter of a turn in the other direction.
How to change the bulb of a front indicator on a Suzuki Sx4
There are two different ways to access the flashing lights. Indeed, it depends on the different models, but accessibility can be done either from the outside or from the inside on your Suzuki Sx4. Access from inside the engine : To start, you have to open the hood. Then, you will need to remove a cover with a screwdriver (regularly torx) in order to access the light block. Now that the block is unclipped, remove it and you can replace your bulb. Wheel arch access : Look under the wheel to see if the fixings are there. In case this is happening, you will have to undo the fasteners and remove the screws with the help of your screwdriver. Then remove the light block from the Suzuki Sx4 gently from the front. All you have to do is replace the bulb and put the unit back the other way. More rarely, on certain models it is conceivable to remove the block of lights from the outside. However, it is relatively rare. In the event that this is happening, with a screwdriver you will need to remove the fasteners, remove the light block slowly and replace the faulty bulb.
How to change the bulb of a rear indicator on a Suzuki Sx4
There are also two different ways to access the turn signal bulb. It can depend on the different types but accessibility can be done either from the inside or from the outside. Access from inside the trunk : Frequently accessibility can be done from inside the trunk. Regarding the headlight blocks, there are screws and fasteners. Remove them and remove the block gently. Then you simply have to replace your faulty bulb with a new one. Then repeat this operation in the other direction. It is also conceivable that accessibility is done from the outside or under the wheel arch. However, it is much less frequent. Whatever happens, you will need to bring your screwdrivers and gently remove the entire headlight unit in order to replace the bulb. To put it in place, carry out the opposite manipulation.