Having working indicators remains mandatory. Remember, not putting a flashing light is liable to 3 point on your driver's license as well as a fine . Although some police officers are sometimes complacent about this. It is therefore essential to have indicators in good condition. We will see below how to change the bulb of a flashing light of Suzuki Vitara, at the front and rear. It is also possible that the problem originated from a short circuit, however it is rather rare.change-flashing-Suzuki-Vitara

Suzuki Vitara: things to know before changing your turn signal

First of all it is essential to correctly buy your type of bulb! In order not to be mistaken, it is advisable to go to a spare parts site or to your mechanic who can select them. Thereafter it will be necessary to pay attention to choose the good color of the bulb. Then you will need a tools very simple but still essential. You will therefore need a screwdriver for a Suzuki Vitara. A cruciform and torx game and nothing can happen to you. Most of the time, the bulbs are at bayonet . To remove the broken bulb it will be necessary to turn it a quarter of a turn to the left. In order to install the new bulb, you will therefore have to turn a quarter of a turn in the other direction.

How to change the bulb of a front indicator on a Suzuki Vitara

There are two main ways to access the turn signals. Indeed, it depends on the different models, however access will be either from the outside or from the inside for your Suzuki Vitara. Access from inside the engine : First of all, you will have to open your hood. And then, you have to unscrew the cover with the help of a screwdriver (usually torx) to access the headlight unit. Now that the block is unscrewed, remove it and it is possible to change your bulb. Wheel arch access : Inspect below the wheel to see if the fasteners are there. If this happens, you will need to remove the fasteners and remove the screws with the help of your screwdriver. Then remove the headlight unit from this Suzuki Vitara gently from the front. Now you just have to change the bulb and position the block in the other direction. Exceptionally, for some cars it is possible to replace the headlight unit from the outside. Nevertheless it is rather rare. If this is what happens, with the help of a screwdriver you will have to disassemble the fasteners, remove the headlight unit slowly and change the defective bulb.

How to change the bulb of a rear indicator on a Suzuki Vitara

There are also two main ways to access this turn signal bulb. It depends on the models however the access will be done either inside or outside. Access from inside the trunk : Almost every time access will be from the trunk. At the headlight blocks, there are screws and fasteners. Take them out and remove the part, being careful. Then you only have to replace your defective bulb with a new one. And then repeat this operation in the other direction. It is also possible that access can be from the outside or through the wheel arch. However, it is much less frequent. Whatever happens, you will have to take your screwdrivers and carefully remove the assembly of the light block so as to change your bulb. To reassemble, proceed to the opposite manipulation.