Having working indicators is a legal requirement. Remember, forgetting to put a turn signal is punishable by 3 point on the permit as well as a fine . Even if some law enforcement officers are sometimes complacent on this point. It is therefore essential to have indicators that work correctly. We will therefore discover in this article how to change the bulb of a Suzuki X90 indicator light, front and rear. It is sometimes conceivable that the dysfunction stems from a bad contact, however it is rather rare.change-flashing-Suzuki-X90

Suzuki X90: things to know before changing your turn signal

First of all, it is essential to buy the right bulb model! In order not to be mistaken, it is advisable to go to a spare parts site or to your auto repairer who knows how to select them. Secondly, you will have to be careful to choose the right color for the bulb. Subsequently, you will need to use a tools super basic but still essential. You will therefore mainly need a screwdriver for a Suzuki X90. A game of cruciform and torx and everything will be doable. In most cases, the bulbs are at bayonet . In order to be able to remove the faulty bulb, you will have to turn the bulb a quarter of a turn counterclockwise. To put the new bulb, it will be necessary to turn a quarter of a turn in the opposite direction.

How to change the bulb of a front turn signal on a Suzuki X90

There are two main ways to reach the flashing lights. Indeed, it depends on the model, however accessibility will be done either from the outside or from the inside for your Suzuki X90. Access from inside the engine : To start, you will need to open the hood. Then, it will be necessary to loosen a cover with a screwdriver (often torx) in order to access the headlight unit. Once the block is unscrewed, remove the latter and it is possible to change this bulb. Wheel arch access : Inspect the underside of the wheel to see if the clips are in this location. If this is the case, it will be necessary to undo the fasteners and remove the screws with a screwdriver. Secondly, remove the headlight unit of the Suzuki X90 delicately from the front. All you have to do is change your bulb and replace the light unit by following the reverse procedure. Less frequently, for some models it is still conceivable to remove the headlight unit from the outside. But it is rather rare. If this is the case, with a screwdriver you will have to remove the fasteners, release the headlight assembly slowly and change your burnt bulb.

How to change the bulb of a rear indicator on a Suzuki X90

There are also two main ways to access your turn signal bulb. It depends on the different types however the accessibility will be done either from inside or from outside. Access from inside the trunk : Frequently, accessibility will be from inside the trunk. Regarding the light blocks, there are screws and fasteners. Remove them and remove the part being careful. Subsequently, it will just be necessary to change this blown bulb by the new one. Then repeat the same manipulation in the other direction. It is also conceivable that accessibility can be from the outside or through the wheel arch. But it is much less frequent. Whatever happens, you will have to take your screwdrivers and gently remove the entire headlamp assembly in order to change your bulb. To put it in place, perform the opposite manipulation.