Using flashing lights that work remains mandatory. As a reminder, omitting a flashing light is liable to 3 point on the permit as well as a traffic ticket . Although some police officers are at times indulgent on this subject. It is therefore essential to have flashing lights in good working order. We will therefore discover with this article how to change the bulb of a flashing light for a Toyota Auris 2 Tourings, at the front and the rear. It is also probable that the dysfunction comes from a false contact, nevertheless it remains rather exceptional.
Toyota Auris 2 Tourings: things to know before changing your turn signal
Above all, it is essential to properly choose the model of your bulb! In order not to be mistaken, we advise you to go to a spare parts website or to your mechanic who knows how to order them for you. Then you will have to think about selecting the right color for your bulb. Then you will need a tools super simple but still essential. You will therefore need a screwdriver for a Toyota Auris 2 Tourings. A cruciform and torx kit and everything will be doable. In most cases, the bulbs are bayonet . In order to be able to remove the faulty bulb, it will be necessary to turn the latter a quarter of a turn counterclockwise. To fix the new bulb, it will be necessary to turn a quarter of a turn in the other direction.
How to change the bulb of a front turn signal on a Toyota Auris 2 Tourings
There are two main ways to reach the flashing lights. Indeed, it depends on the different models, however accessibility can be done either from the outside or from the inside for this Toyota Auris 2 Tourings. Access from inside the engine : To begin with, you will need to open the hood. Then, you will have to remove a cover using a screwdriver (regularly torx) to access the light unit. As soon as the block is unclipped, remove it and the bulb can be changed. Wheel arch access : Check under the wheel to see if the fasteners are there. When this is the case, it will be necessary to remove the fasteners and remove the screws with a screwdriver. Then remove the light unit from your Toyota Auris 2 Tourings slowly from the front. You just need to change the bulb and put the block back in the opposite direction. Less frequently, for some cars it is likely to remove the light unit from the outside. However, it is quite rare. When this is the case, using a screwdriver you will have to remove the fasteners, remove the light unit slowly and replace the burnt out bulb.
How to change the bulb of a rear indicator on a Toyota Auris 2 Tourings
There are also two main ways to access the turn signal bulb. This may depend on the different types, however accessibility can be done either from the inside or from the outside. Access from inside the trunk : Most of the time, accessibility can be done from inside the boot. For these headlight blocks you will find screws and fixings. Remove them and set the part down gently. Then you will just have to replace the burnt out bulb with a new one. Then repeat this operation in the other direction. It is also likely that accessibility could be from the outside or through the wheel arch. However, it is much rarer. In any case, you will have to take your screwdrivers and gently remove the entire headlight unit so as to change this bulb. To reassemble it, do the opposite.