Use of indicators which are in good condition is compulsory. Remember, forgetting to put a flashing light is liable to 3 point on the permit as well as a traffic ticket . Even if some law enforcement officers are sometimes accommodating on this point. It remains therefore necessary to have indicators in good condition. We will find out below how to change the bulb of a turn signal for a Toyota Avensis Verso, front and rear. It is sometimes likely that the concern comes from a short circuit, but this remains relatively exceptional.
Toyota Avensis Verso: things to know before changing your turn signal
To start with it is wiser to choose the right type of bulb! In order not to be mistaken, we advise you to go to a spare parts site or to a garage that can select them. In a second step, you will have to be careful to select the right color for your bulb. Finally, you will need a tools extremely basic but still necessary. You will need a screwdriver for a Toyota Avensis Verso. A cruciform and torx kit and nothing can happen to you. Generally, the bulbs are at bayonet . In order to dismantle the damaged bulb, you will have to turn the bulb a quarter turn to the left. In order to put the new bulb, you will have to turn it a quarter of a turn in the other direction.
How to change the bulb of a front indicator on a Toyota Avensis Verso
There are two main ways to get to the turn signals. It depends on the models, but the accessibility will be either outside or inside for a Toyota Avensis Verso. Access from inside the engine : First of all, you will have to open the hood. Then you need to remove the cover with the help of a screwdriver (most often torx) to access the headlight unit. Now that the block is unclipped, remove it and it is possible to change the bulb. Wheel arch access : Check below the wheel to see if the fasteners are there. When this is the case, you will have to disassemble the fixings and remove the screws using a screwdriver. In the second step, remove the headlight unit from this Toyota Avensis Verso slowly from the front. You simply need to change your bulb and position the block in the other direction. More rarely, for some cars it is likely to remove the headlight unit from the outside. But it is relatively rare. When this is the case, with the help of a screwdriver you will need to remove the fasteners, remove the headlight unit quietly and change your defective bulb.
How to change the bulb of a rear indicator on a Toyota Avensis Verso
There are also two main ways to access the turn signal bulb. It can depend on the different types however the accessibility will be done either inside or outside. Access from inside the trunk : Almost every time accessibility will be from the trunk. For these light blocks, there are screws and fasteners. Remove them and remove the block slowly. Finally you just have to replace the defective bulb with the new one. Then repeat this operation in the other direction. It also remains likely that accessibility is done from the outside or through the wheel arch. But it is much rarer. In all cases, you will have to bring your screwdrivers and remove, being careful, the entire headlight unit so as to change the bulb. To reassemble, reverse the process.