Using flashing lights that are in good condition is mandatory. As a reminder, omitting a flashing light is liable to 3 point on the permit as well as a traffic ticket . Although some law enforcement officials are sympathetic on this point at times. It is therefore essential to have flashing lights in good working order. We will therefore find out now how to replace the bulb of a indicator of a Toyota Avensis, front and rear. It is also conceivable that the concern comes from a short circuit, however it is rather rare.
Toyota Avensis: things to know before replacing your turn signal
Firstly it is essential to buy the right type of bulb! In order not to be mistaken, we advise you to go to a spare parts website or to your mechanic who can order them for you. Then you have to be careful to select the right color for the bulb. Then you will need to use a tools extremely simple but still essential. You will therefore mainly need a screwdriver for a Toyota Avensis. A game of cruciform and torx and you will be able to do it. Generally, the bulbs are at bayonet . In order to remove the defective bulb, you must rotate the bulb a quarter of a turn to the left. To fix the new bulb, you will have to turn it a quarter of a turn in the other direction.
How to change the bulb of a front indicator on a Toyota Avensis
There are two different solutions to access the indicators. Indeed, it depends on the models, however accessibility can be done either from the outside or from the inside on your Toyota Avensis. Access from inside the engine : First, you will need to open your hood. And then, you will have to remove a cover with a screwdriver (frequently torx) to access the light block. Once the unit is unclipped, remove it and it is possible to replace your bulb. Wheel arch access : Check below the wheel to see if the fasteners are there. If this ever happens, you will have to disassemble the fixings and remove the screws with a screwdriver. Then remove the light block of this Toyota Avensis gently from the front. You simply need to replace your bulb and put the light block back in the opposite direction. More rarely, on some models it is conceivable to remove the block of lights from the outside. But it is rather rare. If this is what happens, with a screwdriver you will have to dismantle the fixings, gently release the light block and change your burnt out bulb.
How to change the bulb of a rear indicator on a Toyota Avensis
There are also two different solutions for accessing your turn signal bulb. It can depend on the different types, however accessibility can be done either from the inside or from the outside. Access from inside the trunk : Generally accessibility can be done from the trunk. Regarding the light units, you will find screws and fixings. Take them out and put the piece down, being careful. Then you will simply have to change your burnt out bulb for a new one. And then repeat the same manipulation in the other direction. It is also conceivable that accessibility is done from the outside or under the wheel arch. But it is much rarer. Whatever happens, you will have to use your screwdriver and carefully remove the entire light unit to replace the bulb. To reassemble, do the opposite.