Having working indicators remains mandatory. As a reminder, forgetting to put a flashing light is punishable by 3 point on your driver's license as well as a fine . Even if certain agents of the law are sometimes benevolent on this point. It is therefore necessary to have turn signals in good working order. We will therefore see with this article how to change the bulb of a turn signal light on a Toyota Aygo, front and rear. It is also possible that the malfunction comes from a short circuit, however this is relatively rare.change-flashing-Toyota-Aygo

Toyota Aygo: things to know before changing your turn signal

First of all, it is important to choose the right type of bulb! In order not to be mistaken, it is advisable to go to a spare parts site or to a mechanic who can select them. Then you will have to think about selecting the right color for your bulb. Thereafter, you will need a tools very simple but still essential. You will need a screwdriver for a Toyota Aygo. A game of cruciform and torx and you will be able to do it. In most cases, the bulbs are at bayonet . In order to remove the damaged bulb, you will need to rotate the bulb a quarter of a turn to the left. To attach the new bulb, you will need to rotate it a quarter of a turn in the opposite direction.

How to change the bulb of a front turn signal on a Toyota Aygo

There are two different ways to get to the flashing lights. It depends on the different models, however access can be done either from the outside or from the inside on this Toyota Aygo. Access from inside the engine : First, you will need to open your hood. Then you need to remove the cover using a screwdriver (frequently torx) to access the headlight assembly. Once the block is unclipped, remove it and do not hesitate to change your bulb. Wheel arch access : Check under the wheel to see if the fasteners are in this location. If this is correct, you will have to disassemble the hooks and remove the screws with a screwdriver. Then remove the headlight block of the Toyota Aygo delicately from the front. You simply need to change your bulb and reattach the block in the reverse order. Exceptionally, on some models it is possible to replace the headlight unit from the outside. But it is relatively rare. If this is correct, using a screwdriver you will have to remove the fasteners, release the headlight assembly slowly and change your faulty bulb.

How to change the bulb of a rear indicator on a Toyota Aygo

There are also two different ways to access this turn signal bulb. This may depend on the ranges however the access can be done either from inside or from outside. Access from inside the trunk : In most cases, access can be done from the boot. Regarding the headlight blocks, there are screws and fixings. Remove them and pull the block out slowly. Then you simply have to change your faulty bulb with the new one. Then repeat this operation in the other direction. It is also possible that the access is from the outside or through the wheel arch. But it is much rarer. In all cases, you will have to bring your screwdriver and remove, being careful, the entire headlight unit in order to change the bulb. To set it up, follow the opposite procedure.