Using flashing lights that are in good condition is mandatory. Remember, not putting a flashing light is liable to 3 point on the permit as well as a fine . Although some police officers are regularly complacent on this point. It is therefore essential to have flashing lights that work properly. We will see in this article how to change the bulb of a flashing light for Toyota Camry 2, front and rear. It is also possible that the malfunction comes from a false contact, however it is quite exceptional.change-flashing-Toyota-Camry-2

Toyota Camry 2: things to know before changing your turn signal

Firstly, it is wiser to properly choose the model of your bulb! In order not to be mistaken, it is advisable to go to a spare parts site or to an auto repairer who can order them for you. Secondly, be careful to select the right color for your bulb. Then you will need a tools super basic but still necessary. You will therefore mainly need a screwdriver for a Toyota Camry 2. A cruciform and torx kit and you will be able to do it. Almost every time, the bulbs are bayonet . In order to be able to dismantle the broken bulb, you must turn the bulb a quarter of a turn anticlockwise. To fix the new bulb, you will therefore have to turn a quarter of a turn in the opposite direction.

How to change the bulb of a front indicator on a Toyota Camry 2

There are two different ways to access the flashing lights. Indeed, it depends on the models, however access can be done either from the outside or from the inside on a Toyota Camry 2. Access from inside the engine : To start, you will have to open the hood. And then, you have to unscrew a cover with a screwdriver (frequently torx) in order to access the headlight unit. When the block is unclipped, remove it and do not hesitate to change the bulb. Wheel arch access : Check below the wheel to see if the fasteners are there. If so, you will need to disassemble the fixings and remove the screws with the help of your screwdriver. In the second step, remove the headlight unit from your Toyota Camry 2 gently from the front. It is now enough to change the bulb and position the block of lights following the reverse approach. Less frequently, on certain cars it is possible to replace the headlight unit from the outside. But it is quite rare. If this is the case, with a screwdriver you will have to remove the fixings, remove the headlight unit slowly and change the burnt out bulb.

How to change the bulb of a rear indicator on a Toyota Camry 2

There are also two different ways to access your turn signal bulb. It depends on the models but access can be done either from the inside or from the outside. Access from inside the trunk : Most of the time access can be done from the trunk. Regarding the headlight blocks, there are screws and fixings. Remove them and remove the block, being careful. Then simply replace the burnt out bulb with a new one. And then repeat the same manipulation in reverse. It also remains possible that access is from the outside or under the wheel arch. But it is much rarer. In all cases, you will need to use your screwdriver and carefully remove the entire light block in order to change your bulb. To put it in place, proceed to the opposite manipulation.