Having turn signals that are in good condition is mandatory. As a reminder, forgetting to put a flashing light is punishable by 3 point on your driver's license as well as a fine . Even if some police officers are sometimes sympathetic on this subject. It therefore remains essential to have indicators that work properly. We will therefore find out below how to change the bulb of a turn signal of a Toyota Camry, front and rear. It is also conceivable that the problem originated from a short circuit, but this remains rather exceptional.change-flashing-Toyota-Camry

Toyota Camry: things to know before changing your turn signal

At first it is essential to choose the model of your bulb properly! So as not to be mistaken, we advise you to go to a spare parts site or to your car repairer who will be able to select them. Then it is necessary to think about choosing the right color for your bulb. Then you will need to use a tools very basic but nevertheless essential. You will need a screwdriver for a Toyota Camry. A cruciform and torx game and nothing can happen to you. Generally, the bulbs are at bayonet . In order to dismantle the broken bulb, it will have to be rotated a quarter of a turn to the left. In order to install the new bulb, it is necessary to actually rotate it a quarter turn in the opposite direction.

How to change the bulb of a front indicator on a Toyota Camry

There are two main ways to access the flashing lights. Indeed, it depends on the models, but access will be either from the outside or from the inside on a Toyota Camry. Access from inside the engine : First, open your hood. Then, it is necessary to unscrew a cover using a screwdriver (usually torx) in order to access the light block. When the block is unscrewed, remove it and you can change your bulb. Wheel arch access : Look below the wheel to see if the clips are there. In case this is happening, it is necessary to disassemble the fasteners and remove the screws with the help of your screwdriver. In the second step, carefully remove the light unit from your Toyota Camry from the front. All you have to do is change the bulb and position the light block in the opposite direction. Exceptionally, on some cars it is conceivable to remove the block of lights from the outside. However, it is rather rare. In case this is happening, using a screwdriver you will need to remove the fasteners, gently remove the light block and change the failed bulb.

How to change the bulb of a rear indicator on a Toyota Camry

There are also two main ways to access your turn signal bulb. It may depend on the range, however access will be either from the inside or from the outside. Access from inside the trunk : In most of the cases the access will be done inside the trunk. At the light blocks, you will find screws and fasteners. Remove them and gently remove the part. Then it is necessary to simply replace your faulty bulb with a new one. Then repeat the same manipulation in reverse. It also remains conceivable that access is from the outside or under the wheel arch. However, it is much rarer. In all cases, it is necessary to take your screwdriver and remove, paying close attention to the entire headlight unit in order to change this bulb. To put it in place, perform the reverse manipulation.