Having turn signals that are in good condition is mandatory. Think about it, not putting a turn signal is punishable by 3 point on your driver's license as well as a fine . Even if some police officers are sometimes complacent about this. It therefore remains important to have indicators in good condition. We will therefore find out below how to change the bulb of a indicator of a Toyota Corolla Verso 2, at the front and rear. It is also possible that the malfunction comes from a short circuit, however it is rather rare.
Toyota Corolla Verso 2: things to know before changing your turn signal
To start it is important to properly buy the model of your bulb! In order not to be mistaken, it is advisable to go to a spare parts site or to your garage which can order them for you. In the second place it will be necessary to think of selecting the right color of the bulb. Finally, you will need to use a tools extremely basic but still essential. You will therefore need a screwdriver for a Toyota Corolla Verso 2. A cruciform and torx kit and everything will be doable. Generally, the bulbs are at bayonet . In order to remove the defective bulb you will have to rotate the bulb a quarter of a turn anti-clockwise. To install the new bulb, it will therefore be necessary to rotate a quarter of a turn in the opposite direction.
How to change the bulb of a front indicator on a Toyota Corolla Verso 2
There are two main ways to get to the turn signals. It depends on the models, however access can be done either from the outside or from the inside on a Toyota Corolla Verso 2. Access from inside the engine : First, you will have to open the hood. Then, you must unscrew the cover with the help of a screwdriver (regularly torx) in order to access the headlight unit. When the unit is unclipped, remove it and do not hesitate to change the bulb. Wheel arch access : Look below the wheel to see if the clips are there. If this is correct, you will have to undo the hooks and remove the screws with a screwdriver. Second remove the headlight unit from this Toyota Corolla Verso 2 gently from the front. You just need to change your bulb and position the block in the opposite direction. Less frequently, on some cars it is possible to remove the headlight unit from the outside. However, it is rather rare. If that's right, with the help of a screwdriver you will need to remove the fasteners, gently remove the headlight assembly and replace your failed bulb.
How to change the bulb of a rear indicator on a Toyota Corolla Verso 2
There are also two main ways to access the turn signal bulb. It depends on the different types, however access can be done either from inside or outside. Access from inside the trunk : Frequently access can be done from the trunk. At the headlight blocks, there are screws and fasteners. Take them off and take the piece off, being careful. Finally, you only need to replace the faulty bulb with a new one. Then repeat the same manipulation in reverse. It also remains possible that access is from the outside or through the wheel arch. However, it is much rarer. Whatever happens, you will need to take your screwdriver and carefully remove the entire block of lights in order to change your bulb. To reassemble, perform the opposite manipulation.