Having working flashing lights is mandatory. As a reminder, omitting a flashing light is punishable by 3 point on your driver's license as well as a fine . Although some law enforcement officers are sometimes forgiving about this. It therefore remains important to have flashing lights in good working order. We will therefore discover in this article how to replace the bulb of a indicator of a Toyota Corona, at the front and the rear. It is also conceivable that the concern comes from a false contact, nevertheless it remains rather rare.change-flashing-Toyota-Corona

Toyota Corona: things to know before replacing your turn signal

First it is wiser to choose the right type of bulb! So as not to be mistaken, we advise you to go to a spare parts site or to your professional who can order them for you. In a second step it is necessary to think about choosing the right color of the bulb. Thereafter, you will need to use a tools super simple but still essential. You will therefore need a screwdriver for a Toyota Corona. A cruciform and torx kit and nothing can happen to you. In most cases, the bulbs are at bayonet . In order to remove the damaged bulb, the bulb must be turned a quarter of a turn to the left. So to put the new bulb, it will then turn a quarter of a turn in the opposite direction.

How to change the bulb of a front indicator on a Toyota Corona

There are two different solutions to access the turn signals. It depends on the different models, however access will be done either from the outside or from the inside on a Toyota Corona. Access from inside the engine : First of all, you will have to open your hood. And then, you will have to remove the cover using a screwdriver (often torx) to access the headlight unit. Once the block is unscrewed, remove it and you can replace the bulb. Wheel arch access : Inspect underneath the wheel to see if the clips are there. If this is the case, you will have to remove the fasteners and remove the screws with the help of your screwdriver. Then remove the headlight block from the Toyota Corona delicately from the front. It is now enough to replace the bulb and replace the block following the reverse procedure. More rarely, on some models it is conceivable to remove the headlight unit from the outside. But it is quite rare. If this is the case, using a screwdriver you will have to remove the fasteners, remove the headlight unit quietly and change the faulty bulb.

How to change the bulb of a rear indicator on a Toyota Corona

We can also find two different solutions to access the turn signal bulb. It depends on the models however the access will be done either inside or outside. Access from inside the trunk : Generally access will be from the trunk. At the headlight blocks, there are screws and fasteners. Take them out and remove the block, being careful. Thereafter it will just be necessary to replace the faulty bulb with a new one. And then repeat the same manipulation in the other direction. It also remains conceivable whether access is from the outside or through the wheel arch. But it is much rarer. Whatever happens, you will need to bring your screwdriver and carefully remove the entire light unit so as to replace this bulb. To reassemble, perform the reverse manipulation.