Using working indicators remains a legal obligation. Remember, not putting a flashing light is liable to 3 point on your driver's license as well as a fine . Although some law enforcement officials are sometimes sympathetic on this point. It is therefore essential to have indicators that work properly. We will therefore discover in this article how to change the bulb of a flashing light for a Toyota Hilux, front and rear. It is also possible that the problem comes from a short circuit, however this remains rather exceptional.
Toyota Hilux: things to know before changing your turn signal
First of all it is wiser to correctly choose your type of bulb! In order not to be mistaken, we advise you to go to a spare parts website or to a professional who knows how to order them for you. Secondly, it is necessary to be careful to select the right color of the bulb. Then you will need a tools very basic but still essential. You will need a screwdriver for a Toyota Hilux. A cruciform and torx kit and you will be able to do it. In most cases, the bulbs are at bayonet . In order to remove the damaged bulb, it will be necessary to turn the bulb a quarter of a turn anticlockwise. In order to install the new bulb, you will have to turn it a quarter turn in the opposite direction.
How to change the bulb of a front indicator on a Toyota Hilux
There are two different ways to get to the flashing lights. It depends on the different models, however accessibility can be done either from the outside or from the inside on this Toyota Hilux. Access from inside the engine : First of all, you will have to open your hood. And then, it is necessary to remove the cover with the help of a screwdriver (frequently torx) in order to access the light block. When the block is unscrewed, remove it and it is possible to change this bulb. Wheel arch access : Look below the wheel to see if the fasteners are there. If this is happening, you will need to disassemble the hooks and remove the screws with the help of your screwdriver. Second remove the light block from the Toyota Hilux gently from the front. All you have to do is change your bulb and put the unit back in the reverse order. More rarely, on some models it is possible to replace the light block from the outside. But it is rather rare. If this is happening, with the help of a screwdriver you will need to remove the fasteners, remove the light block slowly and change your defective bulb.
How to change the bulb of a rear indicator on a Toyota Hilux
There are also two different ways to access your turn signal bulb. It depends on the models, however accessibility can be done either from inside or outside. Access from inside the trunk : In most of the cases the accessibility can be done inside the trunk. For these light blocks, you will find screws and fasteners. Remove them and remove the part, being careful. Then it is necessary to just change this defective bulb with the new one. And then repeat the same manipulation in reverse. Accessibility is also possible from outside or under the wheel arch. But it is much less frequent. Whatever happens, you will need to bring your screwdrivers and carefully remove the entire light unit in order to change the bulb. To set it up, take the opposite approach.