Having flashing lights that are in good condition remains an obligation of the law. Think about it, omitting a flashing light is punishable by 3 point on your driver's license as well as a traffic ticket . Although some police officers are regularly benevolent on this point. It is therefore important to have flashing lights that work properly. We will now find out how to replace the bulb of a Toyota Land Cruiser Serie 90 turn signal, front and rear. It is also conceivable that the dysfunction comes from a bad contact, but it remains relatively exceptional.
Toyota Land Cruiser Serie 90: things to know before replacing your turn signal
First of all, it is important to correctly choose the type of bulb! So as not to be mistaken, we advise you to go to a spare parts site or to a mechanic who can select them. Then you will have to be careful to choose the right color for your bulb. Finally, you will need to use a tools very basic but nonetheless essential. So you will mainly need a screwdriver for a Toyota Land Cruiser Serie 90. A set of cruciforms and torxes and you are bound to be able to do it. In the majority of cases, the bulbs are bayonet . In order to be able to dismantle the broken bulb, you will have to turn it a quarter of a turn to the left. In order to fit the new bulb, you will therefore have to turn a quarter of a turn in the opposite direction.
How to change the bulb of a front indicator on a Toyota Land Cruiser Serie 90
There are two main ways to access the turn signals. Indeed, it depends on the model, but access can be done either from the outside or from the inside for a Toyota Land Cruiser Serie 90. Access from inside the engine : First of all, you will have to open the hood. Then you must unscrew a cover with a screwdriver (regularly torx) in order to access the headlight block. As soon as the block is unclipped, remove it and you can replace this bulb. Wheel arch access : Check underneath the wheel to see if the fasteners are in this location. If this is what happens, you will have to undo the fasteners and remove the screws with the help of your screwdriver. Subsequently remove the headlight unit of your Toyota Land Cruiser Serie 90 gently from the front. All you have to do is replace your bulb and reattach the block in the reverse order. Less frequently, for some cars it is conceivable to replace the headlight unit with the exterior. However, it is relatively rare. If this is what happens, with a screwdriver you will have to remove the fixings, remove the headlight unit gently and change your defective bulb.
How to change the bulb of a rear indicator on a Toyota Land Cruiser Serie 90
There are also two main ways to access this indicator bulb. It depends on the different types but the access can be done either from the inside or from the outside. Access from inside the trunk : Most of the time, access can be done from the trunk. For these light blocks there are screws and fixings. Take them out and remove the room, being careful. Finally, you only have to change this defective bulb with the new one. Then repeat this operation in the other direction. It is also conceivable that the access can be from the outside or through the wheel arch. However, it is much rarer. Whatever happens, you will have to use your screwdrivers and carefully remove the entire headlamp assembly in order to replace this bulb. To reassemble it, reverse the procedure.