Using working indicators is a legal requirement. Think about it, omitting a flashing light is liable to 3 point on your driver's license as well as a traffic ticket . Although some police officers are at times benevolent about it. It is therefore essential to have indicators that work correctly. We will now find out how to change the bulb of a turn signal for a Toyota Land Cruiser Sw Serie 200, at the front and rear. It is sometimes likely that the concern is the result of a false contact, however this is relatively rare.
Toyota Land Cruiser Sw Serie 200: things to know before changing your turn signal
First of all, it is wiser to select the model of your bulb! In order not to be mistaken, we advise you to go to a spare parts site or to your mechanic who can order them for you. Then you will have to think about choosing the right color for the bulb. Then you will need to use a tools super simple but still necessary. You will therefore mainly need a screwdriver for a Toyota Land Cruiser Sw Serie 200. A cruciform and torx kit and everything will be doable. In most cases, the bulbs are at bayonet . In order to remove the damaged bulb, you will need to rotate the bulb a quarter of a turn to the left. In order to fit the new bulb, you have to rotate it a quarter of a turn in the other direction.
How to change the bulb of a front indicator on a Toyota Land Cruiser Sw Serie 200
There are two different solutions for accessing the turn signals. It depends on the different models, however accessibility can be done either from the outside or from the inside on a Toyota Land Cruiser Sw Serie 200. Access from inside the engine : First of all, you have to open your hood. Then you need to loosen a cover with the help of a screwdriver (most often torx) to access the light assembly. As soon as the block is unscrewed, remove it and it is possible to change your bulb. Wheel arch access : Check below the wheel to see if the clips are there. When this happens, you have to undo the fasteners and remove the screws using a screwdriver. Subsequently remove the light block of the Toyota Land Cruiser Sw Serie 200 slowly from the front. All you have to do is change your bulb and position the light unit in the opposite direction. Exceptionally, on some models it is likely to replace the light unit from the outside. However, it is relatively rare. When this is what happens, with the help of a screwdriver you will have to remove the fasteners, remove the light unit slowly and change your defective bulb.
How to change the bulb of a rear indicator on a Toyota Land Cruiser Sw Serie 200
There are also two different solutions for accessing this turn signal bulb. It depends on the models, however accessibility can be done either from the inside or from the outside. Access from inside the trunk : Generally accessibility can be done from inside the trunk. At the level of the light blocks, there are screws and fasteners. Take them out and remove the block slowly. Then you simply have to change your defective bulb with the new one. Then repeat this operation in the other direction. Accessibility is also likely to be from the outside or under the wheel arch. However, it is much rarer. In any case, you have to take your screwdrivers and gently remove the entire light unit so as to change your bulb. To reassemble it, carry out the opposite manipulation.