Having working indicators remains mandatory. Remember, forgetting to put a flashing light is liable to 3 point on the permit as well as a fine . Although some law enforcement officials are sometimes lenient on this matter. It is therefore essential to have indicators that work properly. We will now see how to change the bulb of a flashing light for a Toyota Land Cruiser Sw Serie 60, front and rear. It is also conceivable that the concern comes from a short circuit, however it is quite exceptional.change-flashing-Toyota-Land-Cruiser-Sw-Serie-60

Toyota Land Cruiser Sw Serie 60: things to know before changing your turn signal

First of all it is wiser to correctly select the model of your bulb! In order not to be mistaken, we advise you to go to a spare parts website or to your mechanic who will be able to order them for you. In the second step, you will have to be careful to choose the right color for your bulb. Then you will need to use a tools super simple but still essential. You will therefore need a screwdriver for a Toyota Land Cruiser Sw Serie 60. A cruciform and torx kit and everything will be doable. Almost every time, the bulbs are bayonet . In order to dismantle the damaged bulb, you will have to turn it a quarter of a turn to the left. To install the new bulb, you will then have to turn a quarter of a turn in the other direction.

How to change the bulb of a front indicator on a Toyota Land Cruiser Sw Serie 60

There are two main solutions for accessing the turn signals. Indeed, it depends on the models, however access can be done either from the outside or from the inside for your Toyota Land Cruiser Sw Serie 60. Access from inside the engine : First, you will need to open your hood. And then, you have to unscrew a cover using a screwdriver (often torx) to access the headlight unit. When the block is unscrewed, remove it and do not hesitate to change this bulb. Wheel arch access : Check below the wheel to see if the fasteners are there. When this is happening, you will need to remove the hooks and remove the screws using a screwdriver. Then remove the headlight unit from the Toyota Land Cruiser Sw Serie 60 gently from the front. Now you just have to change the bulb and put the light block back in the opposite direction. Less frequently, for some cars it is conceivable to remove the headlight unit from the outside. But it is quite rare. When this is happening, using a screwdriver, you will need to remove the fasteners, remove the headlight assembly quietly and change the faulty bulb.

How to change the bulb of a rear indicator on a Toyota Land Cruiser Sw Serie 60

There are also two main solutions for accessing this turn signal bulb. It depends on the range, however access can be done either from the inside or from the outside. Access from inside the trunk : Most of the time access can be done from the trunk. At the light blocks, there are screws and fasteners. Take them out and remove the part, being careful. Then you simply have to replace this faulty bulb with the new one. And then repeat the same manipulation in reverse. It is also conceivable that access can be from the outside or through the wheel arch. But it is much rarer. In all cases, you will need to use your screwdriver and remove the entire block of lights, being careful, in order to change the bulb. To reassemble, reverse the process.