Having indicators that are in good condition remains an obligation of the law. Think about it, forgetting to put a turn signal is punishable by 3 point on your driver's license as well as a traffic ticket . Although some police are sometimes sympathetic to this. It is therefore essential to have indicators in good condition. We will find out below how to replace the bulb of a Toyota Mirai indicator, front and rear. It is sometimes possible that the dysfunction comes from a false contact, but it remains rather rare.change-flashing-Toyota-Mirai

Toyota Mirai: things to know before replacing your turn signal

Firstly it is essential to correctly choose the model of your bulb! In order not to be mistaken, we advise you to go to a spare parts site or to a professional who can select them. In a second step you will have to be careful to choose the right color for your bulb. Thereafter, you will need to use a tools very simple but still necessary. You will therefore need a screwdriver for a Toyota Mirai. A game of cruciform and torx and everything will be doable. Generally, the bulbs are at bayonet . In order to dismantle the damaged bulb, it will have to be rotated by a quarter of a turn anti-clockwise. To fix the new bulb, you will have to rotate it a quarter of a turn in the opposite direction.

How to change the bulb of a front indicator on a Toyota Mirai

There are two main solutions to access the flashing lights. It depends on the models, but access will be either from the outside or from the inside on a Toyota Mirai. Access from inside the engine : First of all, you will have to open your hood. And then, you will have to loosen the cover with a screwdriver (most often torx) in order to access the headlight unit. When the block is unscrewed, remove it and it is possible to replace your bulb. Wheel arch access : Inspect under the wheel to see if the fasteners are there. When this is the case, you will need to remove the hooks and remove the screws using a screwdriver. In the second step, remove the headlight unit from the Toyota Mirai slowly from the front. Now just replace your bulb and reattach the block the other way. More rarely, on certain cars it is still possible to remove the headlight unit from the outside. However, it is rather rare. When this is the case, with a screwdriver you will have to remove the fasteners, gently remove the headlight unit and change your faulty bulb.

How to change the bulb of a rear indicator on a Toyota Mirai

There are also two main solutions to access your turn signal bulb. It can depend on the ranges but the access will be done either inside or outside. Access from inside the trunk : In most of the cases access will be from the safe. Regarding the headlight blocks, you will find screws and fasteners. Remove them and remove the block gently. Thereafter it will just be necessary to change your defective bulb by the new one. And then repeat the same manipulation in reverse. It is also possible that access can be from the outside or under the wheel arch. However, it is much less frequent. In all cases, you will need to use your screwdriver and carefully remove the entire light unit in order to replace the bulb. To reassemble, perform the reverse manipulation.