Using working indicators remains a legal obligation. As a reminder, not putting a flashing light is punishable by 3 point on the permit as well as a fine . Although some police officers are sometimes complacent on this point. It is therefore essential to have the indicators in good condition. We will see here below how to replace the bulb of a turn signal for a Toyota Proace Verso, front and rear. Sometimes it is conceivable that the problem is caused by a bad contact, however this is quite exceptional.change-turn signal-Toyota-Proace-Verso

Toyota Proace Verso: things to know before replacing your turn signal

To start, it is essential to select the model of your bulb! So as not to be mistaken, we advise you to go to a spare parts site or to a mechanic who will know how to select them. Then you will have to be careful to choose the right color for your bulb. Then you will need to use a tools very basic but still essential. You will therefore mainly need a screwdriver for a Toyota Proace Verso. A set of cruciforms and torxes and nothing can happen to you. Usually the bulbs are bayonet . In order to be able to disassemble the broken bulb, it must be rotated a quarter of a turn counterclockwise. In order to fit the new bulb, you will therefore have to rotate it a quarter of a turn in the opposite direction.

How to change the bulb of a front turn signal on a Toyota Proace Verso

There are two main ways to access the flashing lights. It depends on the model, however access can be done either from the outside or from the inside on your Toyota Proace Verso. Access from inside the engine : First of all, you will have to open the hood. Then, you will have to remove a cover with the help of a screwdriver (often torx) to access the light unit. When the block is unclipped, remove it and your bulb can be replaced. Wheel arch access : Look below the wheel to see if the clips are there. If this is the case, you will have to undo the hooks and remove the screws using a screwdriver. Then remove the headlight assembly from the Toyota Proace Verso gently from the front. You just have to replace the bulb and put the block back in the other direction. Exceptionally, on some models it is conceivable to replace the light unit with the exterior. However, it is quite rare. If ever this is the case, with the help of a screwdriver you will have to remove the fasteners, remove the light unit slowly and change the faulty bulb.

How to change the bulb of a rear indicator on a Toyota Proace Verso

There are also two main ways to access the turn signal bulb. It may depend on the different types but access can be done either from the inside or from the outside. Access from inside the trunk : Generally access can be done from the trunk. For these light blocks there are screws and fasteners. Remove them and remove the block being careful. Then you just have to change your faulty bulb with the new one. Then repeat the same manipulation in the other direction. It is also conceivable that the access is from the outside or through the wheel arch. However, it is much less frequent. Whatever happens, you will have to bring your screwdrivers and gently remove the entire headlamp assembly to replace your bulb. To set it up, perform the reverse process.