Having turn signals that are in good condition is mandatory. Remember, forgetting to put a turn signal is punishable by 3 point on the permit as well as a fine . Even if some law enforcement officers are sometimes lenient on this subject. It is therefore essential to have the indicators in good condition. We will therefore see in this article how to change the bulb of a turn signal of a Toyota Supra Mki, front and rear. It is also possible that the concern comes from a short circuit, but it is quite exceptional.change-flashing-Toyota-Supra-Mki

Toyota Supra Mki: things to know before changing your turn signal

To start, it is essential to select the model of your bulb! In order not to be mistaken, we advise you to go to a spare parts website or to your auto repairer who can select them. Secondly, it is necessary to think about choosing the right color for your bulb. Finally, you will need to use a tools super simple but nevertheless necessary. You will therefore need a screwdriver for a Toyota Supra Mki. A game of cruciform and torx and you will be able to do it. Most of the time, the bulbs are at bayonet . In order to remove the faulty bulb, you will have to turn the bulb a quarter of a turn counterclockwise. To install the new bulb, you will have to turn it a quarter of a turn in the other direction.

How to change the bulb of a front turn signal on a Toyota Supra Mki

There are two different ways to access the turn signals. It depends on the model, but access will be either from the outside or from the inside on this Toyota Supra Mki. Access from inside the engine : To start, you will have to open your hood. Then, you have to loosen a cover with the help of a screwdriver (most often torx) to access the headlight assembly. Now that the block is unscrewed, remove it and don't hesitate to change the bulb. Wheel arch access : Inspect underneath the wheel to see if the fasteners are in this location. If this is what happens, you will have to undo the fasteners and remove the screws with the help of your screwdriver. Secondly, remove the headlight unit of your Toyota Supra Mki delicately from the front. All you have to do is change your bulb and reattach the light unit in the reverse order. Exceptionally, on some models it is possible to remove the headlight unit from the outside. However, it is quite rare. In case this is what happens, with the help of a screwdriver you will have to disassemble the fasteners, remove the headlight assembly slowly and change your faulty bulb.

How to change the bulb of a rear indicator on a Toyota Supra Mki

There are also two different ways to access this turn signal bulb. It depends on the different types however the access will be done either from inside or from outside. Access from inside the trunk : Most of the time, access will be from inside the safe. For these light blocks there are screws and fasteners. Remove them and put the part down being careful. Finally you just have to change the faulty bulb with the new one. Then repeat the same manipulation in the other direction. It is also possible that the access is made from the outside or through the wheel arch. However, it is much rarer. Whatever happens, you will have to use your screwdrivers and gently remove the entire headlight unit so as to change this bulb. To put it in place, do the reverse manipulation.