Use of working flashing lights remains compulsory. As a reminder, not putting a flashing light is liable to 3 point on your driver's license as well as a traffic ticket . Even if some police officers are sympathetic from time to time on this point. It therefore remains essential to have flashing lights that work properly. We will therefore see below how to replace the bulb of a flashing light for Toyota Supra Mkii, front and rear. It is also likely that the dysfunction comes from a false contact, however it remains relatively rare.
Toyota Supra Mkii: things to know before replacing your turn signal
Above all it is essential to choose the right type of bulb! In order not to be mistaken, we advise you to go to a spare parts site or to your garage which will be able to order them for you. In a second step you will have to be careful to choose the right color of the bulb. Thereafter, you will need a tools extremely basic but still necessary. You will therefore mainly need a screwdriver for a Toyota Supra Mkii. A kit of cruciform and torx and you will necessarily be able to get there. Almost every time, the bulbs are bayonet . In order to remove the faulty bulb, it must be turned a quarter of a turn anticlockwise. To put the new bulb, it is necessary to turn it a quarter of a turn in the opposite direction.
How to change the bulb of a front indicator on a Toyota Supra Mkii
There are two different ways to access the turn signals. It depends on the models, however access will be either from the outside or from the inside for this Toyota Supra Mkii. Access from inside the engine : First, you have to open your hood. Then, you will need to remove a cover using a screwdriver (regularly torx) to access the light block. Once the unit is unclipped, remove it and you can replace this bulb. Wheel arch access : Inspect under the wheel to see if the fasteners are there. If ever this happens, it is necessary to remove the fasteners and remove the screws with a screwdriver. Then remove the light block of this Toyota Supra Mkii gently from the front. All you have to do is replace your bulb and replace the block following the reverse procedure. Less frequently, for some cars it is likely to remove the light block from the outside. But it is relatively rare. If this is what happens, using a screwdriver you will need to remove the fasteners, gently release the light block and change your defective bulb.
How to change the bulb of a rear indicator on a Toyota Supra Mkii
There are also two different ways to access the turn signal bulb. It depends on the different types but access will be either from the inside or from the outside. Access from inside the trunk : Almost every time access will be from the trunk. For these headlight blocks, there are screws and fasteners. Remove them and lay the piece gently. Then you simply have to change this defective bulb with a new one. Then repeat this operation in the other direction. It also remains likely that access is from the outside or under the wheel arch. But it is much rarer. In all cases, it is necessary to take your screwdriver and carefully remove the entire block of lights so as to replace this bulb. To reassemble, proceed to the opposite manipulation.