Having working flashing lights is a legal requirement. Think about it, not putting a turn signal is liable to 3 point on the permit as well as a fine . Even if some law enforcement officers are regularly lenient on this subject. It is therefore essential to have flashing lights in good condition. We will find out below how to change the bulb of a Toyota Verso-s flashing light, front and rear. It is also likely that the problem came from a short circuit, but it is relatively exceptional.change-flashing-Toyota-Verso-s

Toyota Verso-s: things to know before changing your turn signal

Above all it is essential to buy the right type of bulb! So as not to be mistaken, we advise you to go to a spare parts website or to your car repairer who knows how to order them for you. Then you will have to be careful to choose the right color for your bulb. Then you will need a tools extremely simple but still essential. You will therefore mainly need a screwdriver for a Toyota Verso-s. A cruciform and torx game and nothing can happen to you. Most of the time, the bulbs are at bayonet . To take out the broken bulb, you will have to rotate it a quarter of a turn anticlockwise. So as to put the new bulb, it will therefore rotate a quarter of a turn in the opposite direction.

How to change the bulb of a front indicator on a Toyota Verso-s

There are two different solutions for achieving the turn signals. It depends on the different models, but access will be either from the outside or from the inside for this Toyota Verso-s. Access from inside the engine : First of all, you will have to open your hood. Then, it is necessary to unscrew the cover with the help of a screwdriver (regularly torx) to access the headlight unit. Once the block is unclipped, remove it and you can change your bulb. Wheel arch access : Check below the wheel to see if the clips are there. If this is happening, you will have to disassemble the fasteners and remove the screws with the help of your screwdriver. Then remove the headlight unit from your Toyota Verso-s gently from the front. You simply need to change the bulb and replace the block by following the reverse procedure. More rarely, for some cars it is likely to replace the headlight unit from the outside. However, it is relatively rare. If this is happening, with the help of a screwdriver you will have to remove the fasteners, remove the headlight unit quietly and change the burnt out bulb.

How to change the bulb of a rear indicator on a Toyota Verso-s

There are also two different solutions for accessing the turn signal bulb. It depends on the different types, however access will be either from the inside or from the outside. Access from inside the trunk : Most of the time the access will be done inside the trunk. At the headlight blocks, there are screws and fasteners. Remove them and remove the piece gently. Then it is only necessary to change your burnt out bulb with a new one. Then repeat the same manipulation in the other direction. It is also likely that access is from the outside or through the wheel arch. However, it is much less frequent. In all cases, you will need to bring your screwdriver and gently remove the entire light unit so as to change this bulb. To set it up, take the opposite step.