Having flashing lights that are in good condition remains an obligation of the law. Remember, forgetting to put a flashing light is liable to 3 point on your driver's license as well as a traffic ticket . Even if some police officers are indulgent from time to time on this point. It is therefore important to have flashing lights in good condition. We will see below how to change the bulb of a flashing light for a Toyota Yaris 2 Ts, front and rear. It is also possible that the problem comes from a false contact, but this remains quite exceptional.change-flashing-Toyota-Yaris-2-Ts

Toyota Yaris 2 Ts: things to know before changing your turn signal

First, it is essential to choose the right bulb model! In order not to be mistaken, it is advisable to go to a spare parts site or to a professional who knows how to order them for you. Then you will have to be careful to select the right color for your bulb. Finally, you will need a tools very simple but still essential. You will therefore mainly need a screwdriver for a Toyota Yaris 2 Ts. A game of cruciform and torx and everything will be doable. Most of the time, the bulbs are at bayonet . In order to remove the faulty bulb, you will have to turn the bulb a quarter of a turn anticlockwise. In order to fix the new bulb, it is then necessary to turn it a quarter of a turn in the opposite direction.

How to change the bulb of a front indicator on a Toyota Yaris 2 Ts

There are two main ways to access the flashing lights. Indeed, it depends on the different models, but accessibility will be either outside or inside for a Toyota Yaris 2 Ts. Access from inside the engine : To start, you will have to open the hood. And then, you must loosen a cover using a screwdriver (most often torx) to access the light block. When the block is unscrewed, remove it and it is possible to change this bulb. Wheel arch access : Check under the wheel to see if the fasteners are there. When this happens, you must disassemble the fixings and remove the screws with a screwdriver. Then remove the light block of this Toyota Yaris 2 Ts gently from the front. Now you just have to change your bulb and put the block back in the opposite direction. Less frequently, for some models it is possible to remove the light block from the outside. Nevertheless it is quite rare. When this is happening, using a screwdriver you will need to remove the fasteners, remove the light block gently and change your failed bulb.

How to change the bulb of a rear indicator on a Toyota Yaris 2 Ts

There are also two main ways to access this turn signal bulb. It depends on the range, however, accessibility will be either inside or outside. Access from inside the trunk : Frequently accessibility will be through the interior of the trunk. Regarding the light blocks, there are screws and fasteners. Take them out and remove the block, being careful. Finally you simply have to replace this faulty bulb with a new one. And then repeat this operation in reverse. It is also possible that accessibility is made from the outside or through the wheel arch. However, it is much rarer. Whatever happens, you need to bring your screwdrivers and remove the entire headlight assembly, being careful so as to change the bulb. To reassemble, perform the reverse manipulation.