Using working indicators remains mandatory. Remember, not putting a flashing light is punishable by 3 point on your driver's license as well as a fine . Although some police are regularly complacent about this. It is therefore important to have indicators in good working order. We will now see how to change the bulb of a Toyota Yaris Verso indicator, front and rear. It is sometimes possible that the problem comes from a short circuit, nevertheless it remains rather rare.change-flashing-Toyota-Yaris-Verso

Toyota Yaris Verso: things to know before changing your turn signal

First of all, it is essential to choose the right bulb model! So as not to be mistaken, it is advisable to go to a spare parts site or to an auto repairer who can select them. Secondly, it is necessary to be careful to select the right color for your bulb. Thereafter, you will need to use a tools super simple but still necessary. You will need a screwdriver for a Toyota Yaris Verso. A kit of cruciform and torx and you will necessarily be able to get there. Most of the time, the bulbs are at bayonet . In order to be able to dismantle the defective bulb, you will have to turn the bulb a quarter of a turn anticlockwise. In order to install the new bulb, you must therefore turn a quarter of a turn in the opposite direction.

How to change the bulb of a front indicator on a Toyota Yaris Verso

There are two different ways to access the flashing lights. It depends on the different models, however accessibility will be either from the outside or from the inside on this Toyota Yaris Verso. Access from inside the engine : First of all, you will have to open your hood. Then, you must unscrew a cover with the help of a screwdriver (usually torx) to access the light block. When the unit is unclipped, remove it and do not hesitate to change this bulb. Wheel arch access : Look under the wheel to see if the fixings are there. In case this is happening, remove the hooks and remove the screws with a screwdriver. Second remove the light block of this Toyota Yaris Verso gently from the front. You simply need to change your bulb and reattach the light block in the opposite direction. Less frequently, on certain models it is still possible to remove the light block from the outside. However, it is rather rare. In the event that this is happening, with the help of a screwdriver you will need to remove the fasteners, release the light block gently and change your defective bulb.

How to change the bulb of a rear indicator on a Toyota Yaris Verso

There are also two different ways to access this turn signal bulb. It can depend on the different types but the accessibility will be either from the inside or from the outside. Access from inside the trunk : Most of the time accessibility will be through the interior of the trunk. For these headlight blocks, there are screws and fasteners. Remove them and lay the piece down slowly. Thereafter it is simply necessary to change this defective bulb by the new one. Then repeat this operation in reverse. It is also possible that accessibility can be from outside or under the wheel arch. However, it is much rarer. In all cases, you must use your screwdriver and carefully remove the entire headlight unit in order to change this bulb. To reassemble, perform the opposite manipulation.