Using working flashing lights remains a legal requirement. As a reminder, omitting a flashing light is liable to 3 point on the permit as well as a traffic ticket . Even if some police officers are complacent about it from time to time. It is therefore essential to have flashing lights that work properly. We are now going to find out how to replace the bulb of a flashing light on a Volkswagen Golf 7 Sw R, at the front and the rear. It is also likely that the malfunction is the result of a short circuit, however it is rather rare.
Volkswagen Golf 7 Sw R: things to know before replacing your turn signal
First of all, it is important to buy the right type of bulb! In order not to be mistaken, we advise you to go to a spare parts site or to a mechanic who will know how to select them. Secondly, you have to be careful to select the right color for your bulb. Finally, you will need a tools very simple but nevertheless essential. You will therefore mainly need a screwdriver for a Volkswagen Golf 7 Sw R. A cruciform and torx kit and everything will be doable. Most of the time, the bulbs are bayonet . In order to remove the damaged bulb you will have to turn the bulb a quarter of a turn to the left. To fix the new bulb, you must then turn it a quarter of a turn in the opposite direction.
How to change the bulb of a front indicator on a Volkswagen Golf 7 Sw R
There are two different solutions to access the flashing lights. Indeed, it depends on the model, nevertheless the access can be done either from the outside or from the inside for a Volkswagen Golf 7 Sw R. Access from inside the engine : To begin with, you will have to open your hood. Then, it is necessary to loosen the cover with a screwdriver (often torx) in order to access the headlight unit. When the block is unscrewed, remove the latter and it is possible to replace your bulb. Wheel arch access : Inspect the underside of the wheel to see if the fasteners are in this location. If this is the case, you have to remove the fasteners and remove the screws with a screwdriver. Secondly, remove the headlight unit of the Volkswagen Golf 7 Sw R delicately from the front. You simply need to replace the bulb and put the unit back in reverse order. Less frequently, for some models it is likely to remove the headlight unit from the outside. However, it is rather rare. If it is, with a screwdriver it will be necessary to remove the fasteners, remove the headlight unit quietly and change the defective bulb.
How to change the bulb of a rear indicator on a Volkswagen Golf 7 Sw R
There are also two different solutions to access the turn signal bulb. This may depend on the different types but access can be done either from inside or from outside. Access from inside the trunk : Frequently access can be done from inside the safe. For these headlight blocks there are screws and fasteners. Take them out and gently pull the part out. Finally, you just need to change your defective bulb with a new one. Then repeat this operation in the other direction. It is also likely that the access could be from the outside or through the wheel arch. However, it is much rarer. Whatever happens, you have to take your screwdrivers and gently remove the entire headlight unit in order to replace this bulb. To reassemble it, do the opposite.