The blinkers turn out to be very important . When they fall in rade it is frankly annoying. In addition to being dangerous, your indicators are above all required , mainly for obvious safety reasons. In the eyes of the law, not activating its flashing light will cause fine of 35 ?? as well as three points on your license. So when you have a turn signal malfunction on this Nissan Kubistar, it is essential to remedy it quickly enough. Through this article we will find out what are the most regular flashing malfunctions and what are their causes.
A single indicator on your Nissan Kubistar does not work
The truly admissible source is that a ampoule is toasted. It is advisable to remove the indicator cover from inside the vehicle and then look. In order to change the lamp, we will have to look at the size of its base but also its power expressed in Watt. In the event that the malfunction does not come from the bulb, it is then due to a malfunction of false contact. Go through the electrical wiring of the turn signal on this Nissan Kubistar, and check if the connections are good. It is possible that the electrical connection is oxidized, if this is the case it will have to be cleaned.
No indicator on your Nissan Kubistar is working
If not one of your turn signals is on, the malfunction probably comes from the central supply of this Nissan Kubistar. Before you change it, you need to look at a few things first. It is possible that this is just a malfunction of fuse . If this is the case, it will suffice to replace it with a new one. It is also possible that this is due to a malfunction in the connection to the power supply. Check the power supply but also its wiring. In the event that this fuse is in good condition and that the power supply is properly wired, you will probably have to change the general power supply.
Nissan Kubistar: Turn signals work but are weak
As soon as the indicators of this Nissan Kubistar light up but remain weak, this usually remains in connection with a malfunction power . It is possible that it is in bad condition, you will have to change it in this case. In the event that a single flashing light is weak, this malfunction comes from a connection problem. In the event that you have invested in a second-hand vehicle, it also remains plausible that the last purchaser replaced the lamp without respecting the voltage.
Nissan Kubistar: The turn signal works but abnormally
When this indicator flashes more or less quickly than normal, this probably comes from a malfunction of mass gain . To put it more simply, it is a false contact. Therefore examine the electrical connections of this indicator to see if one is loose or touches a metal part. Correcting a blinker malfunction is not the most expensive thing. However, different professionals will then replace the central power supply when it can come from a small malfunction of false contact. Leave us a comment in case this article was useful. Good road!