The gearbox remains one of the main components of the Jeep Willys. Quite often it happens that noises arise over time, these generally come from a bad use of the clutch. But depending on the noise, the cause of the problem is sometimes different. So we will find out what will be the most usual noises and how to overcome it .noise-gearbox-Jeep-Willys

The box of my Willys Jeep purrs

This kind of rolling noise will arise in various situations. Usually the problem goes away when you press the clutch pedal. In the event that the Jeep Willys gearbox hums, it is usually a subtle noise , but rather annoying. Usually it's a problem of rolling . If you are good at mechanics, there is a solution. you will be able to start work and detect the faulty bearing. Otherwise, go to a mechanic instead. This kind of noise could get worse over time, and the complete gearbox must be replaced.

Jeep Willys: Whistling of the gearbox

If the gearbox of this Jeep Willys ever whistles, you can expect a rather sudden breakdown. So don't wait too long to take care of it. This type of noise usually appears as soon as items collide and wear out. Difficult to say if repairs are conceivable or if it will be necessary to change the entire gearbox. We advise you to go to your garage for a more thorough check.

Jeep Willys: The gearbox hangs and makes a cracking noise

If the gearbox hangs up when you shift gears, there is inevitably a problem. Indeed, this is one of the most recurrent problems. A gearbox can never have a problem if you are careful, but a little rough everyday use will create problems super quickly. The problem is probably due to a lack of oil! The solution is easy. If the level is low, it will be enough to repeat the level. If the problem does not go away, your gearbox is broken. You will therefore most likely have to change it.

For automatic gearboxes

Since there is not too much human interaction, it is very rare for the Jeep Willys automatic transmission to wear out on its own. The causes are therefore super easy! The first thing to check is your oil level , and why not lubricate the system. However we advise you rather to go to a manufacturer's garage, it is safer. We invite you to post a comment to provide more precision and help our future readers.