Having flashing lights that work remains mandatory. Remember, forgetting to put a flashing light is liable to 3 point on your driver's license as well as a traffic ticket . Even if some law enforcement officers are sometimes lenient on this point. It therefore remains important to have flashing lights in good working order. We will find out below how to replace the bulb of a Nissan Kubistar turn signal light, front and rear. It is also likely that the malfunction comes from a false contact, however it remains quite rare.
Nissan Kubistar: things to know before replacing its indicator
First of all it is wiser to correctly choose your type of bulb! So as not to be mistaken, we advise you to go to a spare parts site or to your mechanic who knows how to select them. In a second step you will have to think about selecting the right color for your bulb. Then you will need a tools extremely basic but still essential. You will need a screwdriver for a Nissan Kubistar. A kit of cruciform and torx and you will necessarily be able to get there. Generally, the bulbs are at bayonet . In order to remove the broken bulb, the bulb must be turned a quarter of a turn to the left. In order to put the new bulb, it is necessary to actually rotate a quarter of a turn in the opposite direction.
How to change the bulb of a front indicator on a Nissan Kubistar
There are two different ways to access the indicators. It depends on the models, however accessibility can be done either outside or inside for this Nissan Kubistar. Access from inside the engine : First of all, you will have to open your hood. And then, it is necessary to remove the cover with the help of a screwdriver (often torx) to access the block of lights. When the unit is unclipped, remove it and do not hesitate to replace your bulb. Wheel arch access : Look under the wheel to see if the fasteners are there. When this is happening, it is necessary to remove the hooks and remove the screws with a screwdriver. In the second step, carefully remove the light block from your Nissan Kubistar from the front. You just need to replace the bulb and replace the block following the reverse procedure. Exceptionally, for certain cars it is likely to remove the block of lights from the outside. However it is quite rare. When this happens, with the help of a screwdriver, you will have to remove the fixings, remove the light unit slowly and change the burnt out bulb.
How to change the bulb of a rear indicator on a Nissan Kubistar
There are also two different ways to access the turn signal bulb. It depends on the range, however accessibility can be done either from inside or outside. Access from inside the trunk : Almost every time accessibility can be done from the trunk. Regarding the headlight blocks, there are screws and fixings. Remove them and slowly remove the block. Then it is necessary to just change your burnt out bulb with a new one. And then repeat the same manipulation in the other direction. It also remains likely that accessibility can be from the outside or through the wheel arch. However, it is much rarer. In all cases, it is necessary to use your screwdriver and gently remove the entire block of lights so as to replace this bulb. To reassemble, do the opposite manipulation.