Using working indicators is a legal requirement. Think about it, not putting a turn signal is liable to 3 point on the permit as well as a fine . Although some police officers are sometimes lenient on this point. It is therefore essential to have the turn signals in good working order. We will therefore discover in this article how to change the bulb of a turn signal of a Nissan Silvia, front and rear. It is also conceivable that the problem arose from a poor contact, however this is relatively rare.change-turn signal-Nissan-Silvia

Nissan Silvia: things to know before changing your turn signal

First of all, it is essential to correctly select the type of bulb! In order not to be mistaken, we advise you to go to a spare parts site or to a mechanic who will be able to select them. Secondly, you will have to be careful to choose the right color for the bulb. Thereafter, you will need a tools extremely simple but still essential. You will therefore need a screwdriver for a Nissan Silvia. A cruciform and torx kit and you're bound to be able to do it. Most of the time, the bulbs are bayonet . In order to be able to remove the faulty bulb, you will have to turn it a quarter of a turn to the left. In order to put the new bulb, you will then have to rotate it a quarter of a turn in the other direction.

How to change the bulb of a front turn signal on a Nissan Silvia

There are two different ways to access the flashing lights. Indeed, it depends on the model, however access can be done either from the outside or from the inside for your Nissan Silvia. Access from inside the engine : First, you have to open the hood. And then, you have to unscrew the cover with the help of a screwdriver (most often torx) to access the headlight block. When the unit is unclipped, remove it and it is possible to change this bulb. Wheel arch access : Look under the wheel to see if the clips are there. If this is what happens, you will have to remove the fasteners and remove the screws with a screwdriver. Secondly, remove the headlight unit of this Nissan Silvia gently from the front. All you have to do is change your bulb and position the unit in the opposite direction. Exceptionally, for some models it is conceivable to replace the headlight unit from the outside. But it is relatively rare. If this is what happens, with the help of a screwdriver you will have to dismantle the fixings, remove the headlight unit quietly and change your burnt out bulb.

How to change the bulb of a rear indicator on a Nissan Silvia

There are also two different ways to access this indicator bulb. This may depend on the different types, however the access can be done either from inside or from outside. Access from inside the trunk : In most cases, access can be done from inside the safe. For these headlight blocks there are screws and fixings. Remove them and gently remove the part. Then you just have to change this blown bulb with the new one. And then redo this operation in reverse order. It is also conceivable that the access is from the outside or through the wheel arch. But it is much less frequent. Whatever happens, you are going to have to take your screwdrivers and gently remove the headlamp assembly in order to change your bulb. To set it up, perform the reverse process.